53292A
1.REMOVE UPPER RADIATOR SUPPORT SEAL
53883F
2.REMOVE FRONT FENDER MAIN SEAL LH (for LHD)
Using a screwdriver, detach the 3 clips and remove the fender main seal.
Tape the screwdriver tip before use.
53882H
3.REMOVE FRONT FENDER MAIN SEAL RH (for RHD)
Using a screwdriver, detach the 3 clips and remove the fender main seal.
Tape the screwdriver tip before use.
52049
4.REMOVE FRONT BUMPER WINCH COVER SUB-ASSEMBLY (w/ Winch)
53111
5.REMOVE RADIATOR GRILLE ASSEMBLY
88211B
6.REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)
53629
7.REMOVE HOOD LOCK CONTROL CABLE COVER
Remove the 3 screws.
Detach the claw and remove the cable cover.
53579
8.REMOVE HOOD LOCK NUT CAP
Using a screwdriver, remove the hood lock nut cap as shown in the illustration.
Tape the screwdriver tip before use.
53510
9.REMOVE HOOD LOCK ASSEMBLY
Remove the 2 bolts and nut.
Remove the hood lock.
Disconnect the connector.
Disconnect the hood lock control cable.
53601
10.REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
Detach the 2 claws.
Disconnect the hood lock control cable and remove the hood lock lever.
53630
11.REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD)
Using a screwdriver, disconnect the clamps shown in the illustration.
Tape the screwdriver tip before use.
Pull the cable from the engine room and remove it.
53630
12.REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD)
Using a screwdriver, disconnect the clamps shown in the illustration.
Tape the screwdriver tip before use.
Pull the cable from the engine room and remove it.