A bolt without a torque specification is shown in the standard bolt chart (See page General>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS).
84840G
1.INSTALL BACK DOOR OPENER SWITCH ASSEMBLY
Connect the connector.
Install the back door opener switch assembly with the 2 screws.
84901
2.INSTALL DOOR OPENING SWITCH SUB-ASSEMBLY (for Face to Face Seat Type)
Attach the 2 claws to install the door opening switch sub-assembly.
67848C
3.INSTALL NO. 2 BACK DOOR SERVICE HOLE COVER (for Face to Face Seat Type)
74611B
4.INSTALL ASSIST GRIP (for Face to Face Seat Type)