Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
87940
1.INSTALL OUTER REAR VIEW MIRROR ASSEMBLY
Attach the claw and Install the mirror with the 3 nuts.
w/ Power Mirror Control System:
Attach the clamp.
Connect the connector labeled A.
67602
2.INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY
67492A
3.INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH
74646
4.INSTALL DOOR ASSIST GRIP COVER
74232
5.INSTALL FRONT UPPER ARMREST BASE PANEL LH
69278B
6.INSTALL FRONT DOOR INSIDE HANDLE BEZEL
28800
7.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).