Home › Vehicle Exterior › MIRROR (EXT) › OUTER REAR VIEW MIRROR › from 2015.08
RM2660E _59 Vehicle Exterior _052853 MIRROR (EXT) _0255762 OUTER REAR VIEW MIRROR A

MIRROR (EXT)  OUTER REAR VIEW MIRROR  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.

·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 87966 4.REMOVE OUTER MIRROR RETRACTOR LH (w/ Multi-terrain Monitor)

a.

Remove the gasket

i.
B278321E01
0.65,1.004 0.804,1.153 0.154,0.149 10 *a

Cut the wire harness at the position shown in the illustration.

Text in Illustration
*a Cut the wire harness here


ii.

Remove the tape.


iii.
B278327

Detach the 9 guides and remove the gasket.

NOTICE:

Make sure to replace the gasket with a new one.




b.

Remove the lower mirror cover

i.
B407886E01
2.051,0.34 2.473,0.507 0.422,0.167 10 *a 1.616,0.755 2.014,0.448 false

Using a tin-blade screwdriver, detach the 4 claws and remove the lower mirror cover.

HINT:

Tape the tin-blade screwdriver tip before use.


Text in Illustration
*a Protective Tape

NOTICE:

Make sure to replace the mirror cover lower with a new one.




c.

Remove the base

i.

Remove the wire harness.


ii.
B407887

Using "TORX" socket wrench T25, remove the 3 "TORX" screws.

NOTICE:

Make sure to replace the "TORX" screws with new ones.



iii.

Detach the guide and remove the base.



d.

Remove the body

i.
B278335

Remove the 5 screws and body.



e.

Remove the body cover

i.
B407888

Detach the 2 claws and remove the connector from body cover.


ii.
B407889

Disconnect the connector.


iii.
B407893E03
0.281,0.698 0.469,0.896 false 0.135,0.604 0.813,0.958 0.677,0.354 10 false A

Detach the 2 guides and remove the body cover.

NOTICE:

Be careful not to break the guide shown in the part of the illustration labeled A.




f.

Remove the actuator sub-assembly

i.
B278345

Remove the 3 screws.


ii.
B278346

Detach the 2 clamps and open the cover.


iii.
B278347

Disconnect the connector and remove the actuator sub-assembly.



g.

Remove the wire harness

i.
B407895

Detach the clamp.


ii.
B278349

Open the cover.


iii.
B278351

Disconnect the connector.


iv.
B278353

Remove the wire harness.



h.

Remove the support spring

i.
B278359

Remove the 2 screws.


ii.

Detach the 6 claws and remove the 2 support springs.



Hide 86790C 5.REMOVE SIDE TELEVISION CAMERA ASSEMBLY (w/ Multi-terrain Monitor)