Home › Vehicle Exterior › WIPER / WASHER › WIPER AND WASHER SYSTEM(w/ Rain Sensor) › 2014.08–2015.08
RM2660E _59 Vehicle Exterior _052854 WIPER / WASHER _0255769 WIPER AND WASHER SYSTEM(w/ Rain Sensor) J

WIPER / WASHER  WIPER AND WASHER SYSTEM(w/ Rain Sensor)  Rain Sensor Circuit  


DESCRIPTION

The auto wiper system adjusts the wiper speed to the optimum speed based on the amount of rain. The rain sensor mounted on the windshield detects rainfall. This system operates when the windshield wiper switch is set to AUTO. The rain sensor sensitivity can be adjusted with the rain sensor adjusting switch. Signals are sent to the windshield wiper ECU from the windshield wiper switch through the CAN line, and from the rains sensor through the LIN line. Based on these signals, the windshield wiper ECU operates the wiper and determines its operation speed.

WIRING DIAGRAM

E161143E07
0.021,0.167 0.948,0.51 0.927,0.344 10 false from IG1 NO.1 Relay 1.104,0.354 1.958,0.531 0.854,0.177 10 false ECU-IG No.1 0.167,1.906 0.938,2.083 0.771,0.177 10 false from Battery 1.375,2.073 1.844,2.25 0.469,0.177 10 false WIPER 1.063,2.688 1.219,2.865 0.156,0.177 10 false B 1.031,3.094 1.208,3.271 0.177,0.177 10 false +1 1,3.49 1.177,3.667 0.177,0.177 10 false +2 0.99,3.875 1.177,4.052 0.188,0.177 10 false +S 1.052,4.219 1.208,4.396 0.156,0.177 10 false E 0.156,4.552 0.417,4.729 0.26,0.177 10 false A22 1.292,2.583 1.521,2.76 0.229,0.177 10 false 2*1 1.302,2.99 1.531,3.167 0.229,0.177 10 false 1*1 1.292,3.396 1.521,3.573 0.229,0.177 10 false 4*1 1.313,3.792 1.542,3.969 0.229,0.177 10 false 3*1 1.313,4.177 1.542,4.354 0.229,0.177 10 false 5*1 1.625,2.594 1.854,2.771 0.229,0.177 10 false 2*2 1.615,2.969 1.844,3.146 0.229,0.177 10 false 5*2 1.625,3.396 1.854,3.573 0.229,0.177 10 false 3*2 1.625,3.781 1.854,3.958 0.229,0.177 10 false 1*2 1.625,4.167 1.854,4.344 0.229,0.177 10 false 4*2 0.177,6.927 0.927,7.115 0.75,0.188 10 false *1: for LHD 0.177,7.271 0.969,7.458 0.792,0.188 10 false *2: for RHD 0.177,7.604 1.135,7.802 0.958,0.198 10 false *3: for LH Side 0.177,7.969 1.167,8.146 0.99,0.177 10 false *4: for RH Side 4.865,2.385 5.177,2.552 0.313,0.167 10 false E16 4.938,1.313 5.375,1.479 0.438,0.167 10 false AUTO 5.792,1.948 5.938,2.104 0.146,0.156 10 false E 4.906,1.948 5.104,2.135 0.198,0.188 10 false +B 4.594,1.208 4.823,1.385 0.229,0.177 10 false 9*3 5.99,1.844 6.292,2.021 0.302,0.177 10 false 10*3 4.594,1.823 4.823,2 0.229,0.177 10 false 2*3 4.583,1.052 4.813,1.229 0.229,0.177 10 false 6*4 6.052,1.688 6.281,1.875 0.229,0.188 10 false 5*4 4.583,1.656 4.813,1.833 0.229,0.177 10 false 3*4 5.76,4.448 7.135,4.625 1.375,0.177 10 false from IG1 NO.1 Relay 6.052,4.969 6.979,5.146 0.927,0.177 10 false ECU-IG No.1 4.615,6.292 4.823,6.479 0.208,0.188 10 false R7 4.615,6.708 6.271,6.885 1.656,0.177 10 false (Overhead Junction Block) 4.635,5.167 4.802,5.344 0.167,0.177 10 false 14 6.021,5.531 6.188,5.708 0.167,0.177 10 false 29 6.021,5.896 6.188,6.073 0.167,0.177 10 false 4 4.927,5.271 5.094,5.448 0.167,0.177 10 false IG 5.688,5.625 5.927,5.802 0.24,0.177 10 false IG2 5.521,5.99 5.927,6.167 0.406,0.177 10 false GND2 4.854,7.771 5.188,8 0.333,0.229 10 false R11 4.844,7.958 5.625,8.135 0.781,0.177 10 false Rain Sensor 6.01,7.396 6.167,7.573 0.156,0.177 10 false 4 6,7.135 6.156,7.313 0.156,0.177 10 false 1 5.646,7.479 5.906,7.656 0.26,0.177 10 false SIG 5.698,7.229 6.021,7.406 0.323,0.177 10 false ES 2.365,7.198 3.813,7.375 1.448,0.177 10 false Windshield Wiper ECU 2.594,1.583 2.917,1.76 0.323,0.177 10 false IG1I 2.604,2.667 2.896,2.844 0.292,0.177 10 false WIG 2.604,3.063 2.781,3.24 0.177,0.177 10 false +1 2.594,3.458 2.771,3.635 0.177,0.177 10 false +2 2.594,4.604 2.75,4.781 0.156,0.177 10 false E 3.323,1.313 3.729,1.49 0.406,0.177 10 false AUTO 3.469,1.969 3.667,2.146 0.198,0.177 10 false ES 2.26,1.573 2.521,1.75 0.26,0.177 10 false E83 2.26,2.688 2.521,2.865 0.26,0.177 10 false E83 2.26,3.073 2.521,3.25 0.26,0.177 10 false E83 2.25,3.469 2.51,3.646 0.26,0.177 10 false E83 2.594,3.854 2.896,4.031 0.302,0.177 10 false +SM 2.25,3.865 2.51,4.042 0.26,0.177 10 false E83 3.74,1.958 4,2.135 0.26,0.177 10 false E83 2.24,4.615 2.5,4.792 0.26,0.177 10 false E85 3.771,1.313 4.031,1.49 0.26,0.177 10 false E85 2.333,1.375 2.49,1.552 0.156,0.177 10 false 5 2.344,2.479 2.5,2.656 0.156,0.177 10 false 8 2.323,2.885 2.479,3.063 0.156,0.177 10 false 1 2.323,3.281 2.479,3.458 0.156,0.177 10 false 2 2.323,3.677 2.479,3.854 0.156,0.177 10 false 7 2.292,4.427 2.458,4.604 0.167,0.177 10 false 10 3.844,1.125 4,1.302 0.156,0.177 10 false 1 3.844,1.76 4,1.938 0.156,0.177 10 false 6 0.781,8.302 1.396,8.479 0.615,0.177 10 false : LIN Line 4.854,2.563 6.396,2.74 1.542,0.177 10 false Windshield Wiper Switch 0.156,4.719 1.365,4.917 1.208,0.198 10 false Front Wiper Motor 4.615,6.458 5.979,6.635 1.365,0.177 10 false Map Light Assembly

PROCEDURE

1.CHECK WIPER
a.

Check the symptoms of the wiper. Check if the causes of the symptoms are any of the following conditions shown in the charts.

It is Raining but Wiper does not Operate
Condition Note
Windshield wiper switch in position other than AUTO Wiper only operates at AUTO setting
Rain sensor temperature is -10°C (14°F) or less, or 70°C (158°F) or higher
·

To prevent improper operation, wiper does not operate when rain sensor temperature is -10°C (14°F) or less

·

To prevent damage to rain sensor, wiper does not operate when outside temperature is 70°C (158°F) or more, or when interior temperature of sensor is 90°C (194°F) or more


It is drizzling, or there is scattered rain If rain droplets do not contact rain sensor, or rain droplets are very small, they are not detected


It is not Raining but Wiper Operates
Condition Note
Condensation on windshield Wiper may operate if condensation occurs in rain sensor detection area. If condensation recurs after rain sensor detection area is wiped, wiper operation may continue.
Sun rays are strong If sudden changes in light intensity occur, wiper may operate
Sudden temperature changes If sudden changes in temperature occur (A/C heater is used in winter, etc.), wiper may operate
Object is contacting rain sensor If inner mirror contacts or strikes rain sensor, wiper may operate
Windshield wiper switch off by AUTO Wiper operates 1 time after windshield wiper switch is turned off by AUTO

Wiper Operation is Irregular
Condition Note
·

Wiper blade is deteriorated

·

Windshield surface is oily


Rain sensor detects rain amount when wipers are operating. When rain is not completely wiped off by wipers, decrease in ability to detect amount of rain occurs.
·

During scattered rain

·

Heavy rain with large droplets


·

During scattered rain or when rain droplets are large, rain droplets contact the sensor intermittently, causing wiper operation to be irregular

·

During heavy rain, it is difficult for sensor to learn "no rain" condition, causing wiper operation to be irregular


Wiper volume is set to minimum Minimum wiper volume setting is designed to be non-sensitive (for users who prefer non-sensitive operation), resulting in irregular wiper operation
Problem with wiper motor position signal When wiper motor position signal has chattering, wiper may operate excessively. During auto wiper operation inspection, if wiper operates several times, and replacement of rain sensor does not correct problem, wiper motor may be malfunctioning.

OK:

Causes of symptoms are one or more of above conditions



OK

END

NG

2.CHECK WIPER OPERATION
2.CHECK WIPER OPERATION
a.

Set the windshield wiper switch to the LO and HI setting, and check that the wipers operate normally.

OK:

Wipers operate normally




OK

3.CHECK WINDSHIELD WIPER SWITCH

NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

3.CHECK WINDSHIELD WIPER SWITCH
a.

Set the windshield wiper switch to AUTO, and check the problem symptom.

Result
Result Proceed to
It is raining but wiper does not operate A
It is not raining but wiper operates B



A

4.CHECK OPERATION OF WIPER

B

10.CHECK RAIN SENSOR
4.CHECK OPERATION OF WIPER
a.

Check operation of the wipers.

Result
Result Proceed to
Wiper does not operate normally A
It is raining but wiper does not operate B



A

5.CHECK WIPER RUBBER

B

10.CHECK RAIN SENSOR
5.CHECK WIPER RUBBER
a.

Activate the washer and check the wiping ability of the wiper.

OK:

No residue after wipe




OK

6.READ VALUE USING INTELLIGENT TESTER (COMBINATION SWITCH)

NG

6.READ VALUE USING INTELLIGENT TESTER (COMBINATION SWITCH)
a.

Check the Data List for proper functioning of the combination switch.

Combination Switch:
Tester Display Measurement Item / Range Normal Condition Diagnostic Note
F Wiper AUTO Switch Front wiper AUTO switch / ON or OFF ON: Front wiper switch in AUTO position
OFF: Wiper switch not in AUTO position
-

OK:

Windshield wiper switch operates.




OK

7.CHECK RAIN SENSOR

NG

REPLACE WINDSHIELD WIPER SWITCH

7.CHECK RAIN SENSOR
a.

Check that the rain sensor is installed properly.

OK:

When viewed from outside of vehicle, rain sensor tape is not peeling and has no air bubbles or dust on it, and sensor has not come off bracket




OK

8.READ VALUE USING INTELLIGENT TESTER (RAIN SENSOR)

NG

REPLACE RAIN SENSOR TAPE

8.READ VALUE USING INTELLIGENT TESTER (RAIN SENSOR)
a.

Check the Data List for proper functioning of the rain sensor.

Rain Sensor
Tester Display Measurement Item/Range Normal Condition Diagnostic Note
Rain Sensor Cold Rain sensor cold / COLD or OK COLD: Front wiper switch in AUTO position
OK: Wiper switch not in AUTO position
-
Rain Sensor Hot Rain sensor cold / HOT or OK HOT: Front wiper switch in AUTO position
OK: Wiper switch not in AUTO position
-

OK:

Rain sensor operates.




OK

9.CHECK RAIN SENSOR

NG

9.CHECK RAIN SENSOR
a.

Set the windshield wiper switch to AUTO. Flatten the end of a cotton swab soaked with water so that it is 4 to 6 mm (0.157 to 0.236 in.) wide. Touch the swab to the rain sensor detection area and check that the wiper LO operation occurs once.

E157938E06
5.583,0.542 5.25,1.354 false 4.771,1.729 4.063,2.188 false 5.625,0.458 6.938,0.635 1.313,0.177 10 false Rain Sensor Center 3.24,2.125 4.26,2.469 1.021,0.344 10 false Rain Sensor Detection Area 5.958,2.073 6.531,2.25 0.573,0.177 10 false Unit: mm 4.302,1.031 4.438,1.198 0.135,0.167 10 false A 4.354,1.563 4.49,1.729 0.135,0.167 10 false A 4.833,2.188 4.969,2.354 0.135,0.167 10 false B 5.521,2.177 5.656,2.344 0.135,0.167 10 false B 4.76,0.656 4.896,0.823 0.135,0.167 10 false C 4.896,0.344 5.031,0.51 0.135,0.167 10 false D 6.615,1.125 6.75,1.292 0.135,0.167 10 false E 6.615,1.469 6.75,1.635 0.135,0.167 10 false E

Result
Result Proceed to
Wiper does not operate A
Wiper operates normally B
Any other operation C



A

B

END

C

REPLACE WINDSHIELD WIPER ECU

10.CHECK RAIN SENSOR
a.

Check that the rain sensor is installed properly.

OK:

When viewed from outside of vehicle, rain sensor tape is not peeling and has no air bubbles or dust on it, and sensor has not come off bracket




OK

NG

REPLACE RAIN SENSOR TAPE