Home › Vehicle Exterior › WIPER / WASHER › WASHER NOZZLE (for Front Side) › 2014.08–2015.08
RM2660E _59 Vehicle Exterior _052854 WIPER / WASHER _0255775 WASHER NOZZLE(for Front Side) A

WIPER / WASHER  WASHER NOZZLE(for Front Side)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the LH and RH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 85035 1.INSTALL WASHER NOZZLE SUB-ASSEMBLY (w/ PTC Heater)

a.

Connect the hose.


b.
E271517

Attach the 4 claws to install the washer nozzle.


c.
E273799

Connect the connector and attach the connector clamp.


Hide 85035 2.INSTALL WASHER NOZZLE SUB-ASSEMBLY (w/o PTC Heater)

a.
E157741

Attach the 3 clamps to install the washer nozzle.


b.

Connect the hose.


Hide 55781E 3.INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

Hide 53883F 5.INSTALL FRONT FENDER MAIN SEAL LH

Hide 53882H 6.INSTALL FRONT FENDER MAIN SEAL RH

Hide 53292A 7.INSTALL UPPER RADIATOR SUPPORT SEAL

Hide 8.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).