Home › Vehicle Exterior › WIPER / WASHER › HEADLIGHT CLEANER MOTOR › 2014.08–2015.08
RM2660E _59 Vehicle Exterior _052854 WIPER / WASHER _0255778 HEADLIGHT CLEANER MOTOR A

WIPER / WASHER  HEADLIGHT CLEANER MOTOR  INSTALLATION  


PROCEDURE

Hide 85280A 1.INSTALL HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY

a.
E157686

Install the headlight cleaner motor and pump together with the gasket in the direction shown in the illustration.

HINT:

Make sure the gasket is positioned as shown in the illustration.



b.

Connect the connector.


Hide 85330 2.INSTALL WINDSHIELD WASHER JAR ASSEMBLY

a.
E156161E01
0.238,1.68 0.524,2.064 0.286,0.384 1.481,0.116 1.768,0.523 0.286,0.407 0.198,1.067 0.484,1.577 0.286,0.51 0.565,0.517 0.851,0.929 0.286,0.412 0.272,1.68 0.479,1.901 0.207,0.221 10 (1) 1.51,0.122 1.717,0.342 0.207,0.221 10 (2) 0.221,1.078 0.428,1.299 0.207,0.221 10 (3) 0.605,0.534 0.811,0.755 0.207,0.221 10 (4)

Temporarily install the windshield washer jar with the 4 bolts.


b.

Tighten the 4 bolts in the order shown in the illustration to install the windshield washer jar.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


c.

Connect the headlight cleaner hose to the windshield washer jar and pump.


d.
E156160E02
1.392,1.259 1.607,1.349 0.216,0.09 1.392,1.259 1.607,1.349 0.216,0.09

Connect the 2 connectors.


e.

Attach the clamp.


Hide 4. FILL WINDSHIELD WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID

Hide 75860A 6.INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY LH

Hide 76622D 8.INSTALL FRONT FENDER MUDGUARD LH