Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
55606
1.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
2.REMOVE STOP LIGHT SWITCH
Disconnect the connector.
Turn the stop light switch counterclockwise and remove it.
84345
3.REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER
Using a screwdriver, detach the 2 claws and remove the stop light switch mounting adjuster.
The stop light switch mounting adjuster must not be reused.
Tape the screwdriver tip before use.
|
Protective Tape |