When the headlight leveling ECU*1 or headlight swivel ECU*2 detects a malfunction in itself, this DTC is stored.
*1: w/ Static Headlight Auto Leveling
*2: w/ Dynamic Headlight Auto Leveling
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B2420 | ·
A malfunction in the headlight leveling ECU. (w/ Static Headlight Auto Leveling) ·
A malfunction in the headlight swivel ECU. (w/ Dynamic Headlight Auto Leveling) |
·
Headlight leveling ECU assembly (w/ Static Headlight Auto Leveling) ·
Headlight swivel ECU assembly (w/ Dynamic Headlight Auto Leveling) |
After replacing the headlight leveling ECU*1 or headlight swivel ECU*2, initialization of the ECU is necessary (See page Vehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>INITIALIZATION).
*1: w/ Static Headlight Auto Leveling
*2: w/ Dynamic Headlight Auto Leveling
Clear the DTCs (See page Vehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>DTC CHECK / CLEAR).
Check for DTCs (See page Vehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>DTC CHECK / CLEAR).
DTC B2420 output does not occur.
| Result | Proceed to |
|---|---|
| OK | A |
| NG (w/ Static Headlight Auto Leveling) | B |
| NG (w/ Dynamic Headlight Auto Leveling) (for LHD) | C |
| NG (w/ Dynamic Headlight Auto Leveling) (for RHD) | D |
A
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)
B
C
D