Initialization of the headlight leveling ECU*1 or headlight swivel ECU*2 has not been performed.
*1: w/ Static Headlight Auto Leveling
*2: w/ Dynamic Headlight Auto Leveling
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B2450 | ·
Initialization of the headlight leveling ECU has not been performed. (w/ Static Headlight Auto Leveling) ·
Initialization of the headlight swivel ECU assembly has not been performed. (w/ Dynamic Headlight Auto Leveling) |
·
Headlight leveling ECU assembly (w/ Static Headlight Auto Leveling) ·
Headlight swivel ECU assembly (w/ Dynamic Headlight Auto Leveling) |
After replacing the headlight leveling ECU*1 or headlight swivel ECU*2, initialization of the ECU is necessary (See page Vehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>INITIALIZATION).
*1: w/ Static Headlight Auto Leveling
*2: w/ Dynamic Headlight Auto Leveling
Perform initialization of the headlight leveling ECU*1 or headlight swivel ECU*2 (See page Vehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>INITIALIZATION).
*1: w/ Static Headlight Auto Leveling
*2: w/ Dynamic Headlight Auto Leveling
NEXT
Check for DTCs (See page Vehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>DTC CHECK / CLEAR).
DTC B2450 is not output.
| Result | Proceed to |
|---|---|
| OK | A |
| NG (w/ Static Headlight Auto Leveling) | B |
| NG (w/ Dynamic Headlight Auto Leveling) (for LHD) | C |
| NG (w/ Dynamic Headlight Auto Leveling) (for RHD) | D |
If the headlight leveling ECU*1 or headlight swivel ECU*2 stores DTC B2450 even though the ECU has been initialized, there may be a malfunction in the headlight leveling ECU*1 or headlight swivel ECU*2.
*1: w/ Static Headlight Auto Leveling
*2: w/ Dynamic Headlight Auto Leveling
A
B
C
D