Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER(for Standard) › 2014.08–2015.08
RM2660E _59 Vehicle Exterior _052857 EXTERIOR PANELS / TRIM _0255830 REAR BUMPER(for Standard) A

EXTERIOR PANELS / TRIM  REAR BUMPER(for Standard)  DISASSEMBLY  


PROCEDURE

Hide 82165 1.REMOVE NO. 2 FRAME WIRE

a.

w/ TOYOTA Parking Assist-sensor System, w/o Rear Fog Light:

Remove the No. 2 frame wire.

i.

Disconnect the 4 connectors.


ii.

Detach the 12 clamps and remove the No. 2 frame wire.

B302192



b.

w/ TOYOTA Parking Assist-sensor System, w/ Rear Fog Light:

Remove the No. 2 frame wire.

i.

Disconnect the 6 connectors.


ii.

Detach the 14 clamps and remove the No. 2 frame wire.

B302172



c.

w/o TOYOTA Parking Assist-sensor System, w/ Rear Fog Light:

Remove the No. 2 frame wire.

i.

Disconnect the 2 connectors.


ii.

Detach the 13 clamps and remove the No. 2 frame wire.

B302193



Hide 89341A 2.REMOVE NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

Hide 89348 3.REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

Hide 89348A 4.REMOVE NO. 2 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

Hide 52615 5.REMOVE REAR BUMPER ENERGY ABSORBER

a.
B302173

Detach the 8 claws and remove the rear bumper energy absorber.


Hide 81920 6.REMOVE REFLEX REFLECTOR ASSEMBLY LH (w/o Rear Fog Light)

a.
B302187

Remove the 2 nuts.


b.

Detach the claw and remove the reflex reflector assembly LH.


Hide 81910 7.REMOVE REFLEX REFLECTOR ASSEMBLY RH (w/o Rear Fog Light)

HINT:

Use the same procedure described for the LH side.


Hide 81490C 8.REMOVE REAR FOG LIGHT ASSEMBLY LH (w/ Rear Fog Light)

Hide 81480A 9.REMOVE REAR FOG LIGHT ASSEMBLY RH (w/ Rear Fog Light)

HINT:

Use the same procedure described for the LH side.


Hide 52187C 10.REMOVE REAR NO. 2 BUMPER SIDE BRACKET (w/ Tire Carrier)

a.
B185559E03
0.854,0.188 1.604,0.188 1.604,0.188 2.073,0.573 true 1.135,1.354 0.927,1.427 0.927,1.427 0.927,1.667 false 0.875,1.688 1.073,1.885 0.198,0.198 10 false *2 0.615,0.104 0.854,0.365 0.24,0.26 10 false *1

Remove the 2 screws.

Text in Illustration
*1 Rear No. 2 Bumper Side Bracket
*2 Rear No. 3 Bumper Side Bracket


b.

Detach the 3 claws and 2 clips, and remove the rear No. 2 bumper side bracket and rear No. 3 bumper side bracket.