Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER(for Standard) › 2014.08–2015.08
RM2660E _59 Vehicle Exterior _052857 EXTERIOR PANELS / TRIM _0255830 REAR BUMPER(for Standard) A

EXTERIOR PANELS / TRIM  REAR BUMPER(for Standard)  REASSEMBLY  


PROCEDURE

Hide 52187C 1.INSTALL REAR NO. 2 BUMPER SIDE BRACKET (w/ Tire Carrier)

a.

Attach the 3 claws and 2 clips to install the rear No. 2 bumper side bracket and rear No. 3 bumper side bracket.


b.

Install the 2 screws.


Hide 81920 2.INSTALL REFLEX REFLECTOR ASSEMBLY LH (w/o Rear Fog Light)

a.

Attach the claw to install the reflex reflector assembly LH.


b.

Install the 2 nuts.


Hide 81910 3.INSTALL REFLEX REFLECTOR ASSEMBLY RH (w/o Rear Fog Light)

HINT:

Use the same procedure described for the LH side.


Hide 81490C 4.INSTALL REAR FOG LIGHT ASSEMBLY LH (w/ Rear Fog Light)

Hide 81480A 5.INSTALL REAR FOG LIGHT ASSEMBLY RH (w/ Rear Fog Light)

HINT:

Use the same procedure described for the LH side.


Hide 52615 6.INSTALL REAR BUMPER ENERGY ABSORBER

a.

Attach the 8 claws to install the rear bumper energy absorber.


Hide 89348 7.INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

Hide 89348A 8.INSTALL NO. 2 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

Hide 89341A 9.INSTALL NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

Hide 82165 10.INSTALL NO. 2 FRAME WIRE

a.

w/ TOYOTA Parking Assist-sensor System, w/o Rear Fog Light:

Install the No. 2 frame wire.

i.

Attach the 12 clamps to install the No. 2 frame wire.


ii.

Connect the 4 connectors.



b.

w/ TOYOTA Parking Assist-sensor System, w/ Rear Fog Light:

Install the No. 2 frame wire.

i.

Attach the 14 clamps to install the No. 2 frame wire.


ii.

Connect the 6 connectors.



c.

w/o TOYOTA Parking Assist-sensor System, w/ Rear Fog Light:

Install the No. 2 frame wire.

i.

Attach the 13 clamps to install the No. 2 frame wire.


ii.

Connect the 2 connectors.