89348
1.INSTALL NO. 1 ULTRASONIC SENSOR RETAINER
Use the same procedure to install the No. 1 ultrasonic sensor retainer on the other side.
Align the keyhole and protrusion as shown in the illustration.
| *a | Protrusion |
| *b | Keyhole |
Do not damage the bumper with the protrusion when installing the No. 1 ultrasonic sensor retainer.
Securely install the No. 1 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the rear bumper.
The illustration shows the No. 1 ultrasonic sensor retainer for the RH corner. The vertical orientation of the No. 1 ultrasonic sensor retainers for the LH corner is opposite that of the image shown in the illustration.
Attach the 2 claws to install the No. 1 ultrasonic sensor retainer.
89348A
2.INSTALL NO. 2 ULTRASONIC SENSOR RETAINER
Use the same procedure to install the No. 2 ultrasonic sensor retainer on the other side.
Align the keyhole and protrusion as shown in the illustration.
| *a | Protrusion |
| *b | Keyhole |
Do not damage the bumper with the protrusion when installing the No. 2 ultrasonic sensor retainer.
Securely install the No. 2 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the rear bumper.
Attach the 2 claws to install the No. 2 ultrasonic sensor retainer.
89341A
3.INSTALL NO. 1 ULTRASONIC SENSOR
Use the same procedure for all No. 1 ultrasonic sensors.
Attach the 2 claws to install the No. 1 ultrasonic sensor.
Push the ultrasonic sensor retainer from the outside of the bumper when there is a gap between the retainer and the bumper surface. In this case, do not push on the ultrasonic sensor.
82165
4.INSTALL NO. 2 FRAME WIRE
for Standard:
(See page Vehicle Exterior>EXTERIOR PANELS / TRIM>REAR BUMPER(for Standard)>REASSEMBLY).
w/ Towing Hitch:
(See page Vehicle Exterior>EXTERIOR PANELS / TRIM>REAR BUMPER (w/ Towing Hitch)>REASSEMBLY).
w/ Pintle Hook:
(See page Vehicle Exterior>EXTERIOR PANELS / TRIM>REAR BUMPER(w/ Pintle Hook)>REASSEMBLY).
52159
5.INSTALL REAR BUMPER COVER
for Standard:
(See page Vehicle Exterior>EXTERIOR PANELS / TRIM>REAR BUMPER(for Standard)>INSTALLATION).
w/ Towing Hitch:
(See page Vehicle Exterior>EXTERIOR PANELS / TRIM>REAR BUMPER (w/ Towing Hitch)>INSTALLATION).
w/ Pintle Hook:
(See page Vehicle Exterior>EXTERIOR PANELS / TRIM>REAR BUMPER(w/ Pintle Hook)>INSTALLATION).