Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER (w/ Towing Hitch) › from 2015.08
RM2660E _59 Vehicle Exterior _052857 EXTERIOR PANELS / TRIM _0255831 REAR BUMPER(w/ Towing Hitch) A

EXTERIOR PANELS / TRIM  REAR BUMPER(w/ Towing Hitch)  DISASSEMBLY  


PROCEDURE

Hide 82165 1.REMOVE NO. 2 FRAME WIRE (w/ TOYOTA Parking Assist-sensor System)

a.

Disconnect the 4 connectors.

B422071


b.

Detach the 12 clamps and remove the No. 2 frame wire.


Hide 89341B 2.REMOVE NO. 2 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

Hide 52615 3.REMOVE REAR BUMPER ENERGY ABSORBER

a.
B414835

Detach the 8 claws and remove the rear bumper energy absorber.


Hide 81920 4.REMOVE REFLEX REFLECTOR ASSEMBLY LH

a.
B414836

Remove the 3 screws.


b.

Detach the guide and remove the reflex reflector assembly LH.


Hide 81910 5.REMOVE REFLEX REFLECTOR ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 52169C 6.REMOVE REAR BUMPER LOWER COVER

a.
B422074

Remove the clip.


b.

Detach the 4 claws and rear lower bumper cover.


Hide 51776B 7.REMOVE REAR NO. 2 STEP COVER

a.
B422073

Remove the 2 screws and 2 clips.


b.

Detach the 6 claws and remove the rear No. 2 step cover.


Hide 52463 8.REMOVE REAR BUMPER PAD LH

a.
B414875

Remove the rear bumper pad LH.


Hide 52462 9.REMOVE REAR BUMPER PAD RH

HINT:

Use the same procedure described for the LH side.


Hide 52356 10.REMOVE REAR BUMPER STEP CUSHION

a.
B414838

Remove the rear bumper step cushion.

HINT:

Use the same procedure for all rear bumper step cushions.