Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER (w/ Towing Hitch) › 2014.08–2015.08
RM2660E _59 Vehicle Exterior _052857 EXTERIOR PANELS / TRIM _0255831 REAR BUMPER(w/ Towing Hitch) A

EXTERIOR PANELS / TRIM  REAR BUMPER(w/ Towing Hitch)  REASSEMBLY  


PROCEDURE

Hide 51776B 1.INSTALL REAR NO. 2 STEP COVER

a.

Attach the 4 claws to install the rear No. 2 step cover.


b.

Install the 2 screws and 2 clips.


Hide 52169C 2.INSTALL REAR LOWER BUMPER COVER

a.

Install the rear lower bumper cover with the clip.


Hide 81920 3.INSTALL REFLEX REFLECTOR ASSEMBLY LH

a.

Attach the claw to install the reflex reflector assembly LH.


b.

Install the 2 nuts.


Hide 81910 4.INSTALL REFLEX REFLECTOR ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 52615 5.INSTALL REAR BUMPER ENERGY ABSORBER

a.

Attach the 8 claws to install the rear bumper energy absorber.


Hide 89348 6.INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

Hide 89348A 7.INSTALL NO. 2 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

Hide 89341A 8.INSTALL NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

Hide 82165 9.INSTALL NO. 2 FRAME WIRE (w/ TOYOTA Parking Assist-sensor System)

a.

Attach the 12 clamps to install the No. 2 frame wire.


b.

Connect the 4 connectors.