Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER (w/ Towing Hitch) › from 2015.08
RM2660E _59 Vehicle Exterior _052857 EXTERIOR PANELS / TRIM _0255831 REAR BUMPER(w/ Towing Hitch) A

EXTERIOR PANELS / TRIM  REAR BUMPER(w/ Towing Hitch)  REASSEMBLY  


PROCEDURE

Hide 52356 1.INSTALL REAR BUMPER STEP CUSHION

HINT:

When installing the rear bumper step cushion, heat the rear bumper cover using a heat light.


Standard:
Item Temperature
Rear Bumper Cover 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the rear bumper cover excessively.


a.

When using a new rear bumper cover:

i.

Clean the surface of a new rear bumper cover.


ii.

Using a heat light, heat the rear bumper cover surface.



b.

When reusing the rear bumper cover:

i.

Using a heat light, heat the rear bumper cover surface.


ii.

Remove the double-sided tape from the rear bumper cover.


iii.

Wipe off any tape adhesive residue with cleaner.



c.
B414838

Install a new rear bumper step cushion.

HINT:

Use the same procedure for all rear bumper step cushions.


i.

Remove the peeling paper from the face of a new rear bumper step cushion.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



ii.

Install the rear bumper step cushion as shown in the illustration.

HINT:

Press the rear bumper step cushion LH firmly to install it.




Hide 52463 2.INSTALL REAR BUMPER PAD LH

HINT:

When installing the rear bumper pad LH, heat the rear bumper cover using a heat light.


Standard:
Item Temperature
Rear Bumper Cover 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the rear bumper cover excessively.


a.

When using a new rear bumper cover:

i.

Clean the surface of a new rear bumper cover.


ii.

Using a heat light, heat the rear bumper cover surface.



b.

When reusing the rear bumper cover:

i.

Using a heat light, heat the rear bumper cover surface.


ii.

Remove the double-sided tape from the rear bumper cover.


iii.

Wipe off any tape adhesive residue with cleaner.



c.
B414837E03
2.114,0.494 2.289,0.708 0.175,0.214 10 *a 1.881,0.754 1.881,0.591 1.881,0.591 2.05,0.591 false

Install a new rear bumper pad LH.

i.

Remove the peeling paper from the face of a new rear bumper pad LH.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



ii.

Align the rear bumper pad LH with the mark-off line of the rear bumper cover and install it as shown in the illustration.

HINT:

Press the rear bumper pad LH firmly to install it.


Text in Illustration
*a Mark-off Line



Hide 52462 3.INSTALL REAR BUMPER PAD RH

HINT:

Use the same procedure described for the LH side.


Hide 51776B 4.INSTALL REAR NO. 2 STEP COVER

a.

Attach the 6 claws to install the rear No. 2 step cover.


b.

Install the 2 screws and 2 clips.


Hide 52169C 5.INSTALL REAR BUMPER LOWER COVER

a.

Attach the 4 claws to install the rear bumper lower cover.


b.

Install the clip.


Hide 81920 6.INSTALL REFLEX REFLECTOR ASSEMBLY LH

a.

Attach the guide to install the reflex reflector assembly LH.


b.

Install the 3 screws


Hide 81910 7.INSTALL REFLEX REFLECTOR ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 52615 8.INSTALL REAR BUMPER ENERGY ABSORBER

a.

Attach the 8 claws to install the rear bumper energy absorber.


Hide 89341B 9.INSTALL NO. 2 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

Hide 82165 10.INSTALL NO. 2 FRAME WIRE (w/ TOYOTA Parking Assist-sensor System)

a.

Attach the 12 clamps to install the No. 2 frame wire.


b.

Connect the 4 connectors.