Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER(w/ Pintle Hook) › from 2015.08
RM2660E _59 Vehicle Exterior _052857 EXTERIOR PANELS / TRIM _0255832 REAR BUMPER(w/ Pintle Hook) A

EXTERIOR PANELS / TRIM  REAR BUMPER(w/ Pintle Hook)  REASSEMBLY  


PROCEDURE

Hide 52187C 1.INSTALL REAR BUMPER NO. 2 SIDE BRACKET (w/ Tire Carrier)

a.

Attach the 7 claws and 2 clips to install the rear bumper No. 2 side bracket and rear bumper No. 3 side bracket.


b.

Install the 2 screws.


Hide 51776B 2.INSTALL REAR NO. 2 STEP COVER

a.

Attach the 10 claws to install the rear No. 2 step cover.


Hide 52356 3.INSTALL REAR BUMPER STEP CUSHION

HINT:

When installing the rear bumper step cushion, heat the rear bumper cover using a heat light.


Standard:
Item Temperature
Rear Bumper Cover 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the rear bumper cover excessively.


a.

When using a new rear bumper cover:

i.

Clean the surface of a new rear bumper cover.


ii.

Using a heat light, heat the rear bumper cover surface.



b.

When reusing the rear bumper cover:

i.

Using a heat light, heat the rear bumper cover surface.


ii.

Remove the double-sided tape from the rear bumper cover.


iii.

Wipe off any tape adhesive residue with cleaner.



c.
B414838

Install a new rear bumper step cushion.

HINT:

Use the same procedure for all rear bumper step cushions.


i.

Remove the peeling paper from the face of a new rear bumper step cushion.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



ii.

Install the rear bumper step cushion as shown in the illustration.

HINT:

Press the rear bumper step cushion firmly to install it.




Hide 52463 4.INSTALL REAR BUMPER PAD LH

HINT:

When installing the rear bumper pad LH, heat the rear bumper cover using a heat light.


Standard:
Item Temperature
Rear Bumper Cover 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the rear bumper cover excessively.


a.

When using a new rear bumper cover:

i.

Clean the surface of a new rear bumper cover.


ii.

Using a heat light, heat the rear bumper cover surface.



b.

When reusing the rear bumper cover:

i.

Using a heat light, heat the rear bumper cover surface.


ii.

Remove the double-sided tape from the rear bumper cover.


iii.

Wipe off any tape adhesive residue with cleaner.



c.
B414837E04
2.114,0.494 2.289,0.708 0.175,0.214 10 *a 1.881,0.754 1.881,0.591 1.881,0.591 2.05,0.591 false

Install a new rear bumper pad LH.

i.

Remove the peeling paper from the face of a new rear bumper pad LH.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



ii.

Align the rear bumper pad LH with the mark-off line of the rear bumper cover and install it as shown in the illustration.

HINT:

Press the rear bumper pad LH firmly to install it.


Text in Illustration
*a Mark-off Line



Hide 52462 5.INSTALL REAR BUMPER PAD RH

HINT:

Use the same procedure described for the LH side.


Hide 81920 6.INSTALL REFLEX REFLECTOR ASSEMBLY LH (w/o Rear Fog Light)

a.

Attach the guide to install the reflex reflector assembly LH.


b.

Install the 3 screws.


Hide 81910 7.INSTALL REFLEX REFLECTOR ASSEMBLY RH (w/o Rear Fog Light)

HINT:

Use the same procedure described for the LH side.


Hide 81490C 8.INSTALL REAR FOG LIGHT ASSEMBLY LH (w/ Rear Fog Light)

Hide 81480A 9.INSTALL REAR FOG LIGHT ASSEMBLY RH (w/ Rear Fog Light)

HINT:

Use the same procedure described for the LH side.


Hide 52615 10.INSTALL REAR BUMPER ENERGY ABSORBER

a.

Attach the 8 claws to install the rear bumper energy absorber.


Hide 89348A 11.INSTALL NO. 2 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

Hide 82165 12.INSTALL NO. 2 FRAME WIRE

a.

w/ TOYOTA Parking Assist-sensor System, w/ Rear Fog Light:

i.

Attach the 14 clamps to install the No. 2 frame wire.


ii.

Connect the 6 connectors.



b.

w/ TOYOTA Parking Assist-sensor System, w/o Rear Fog Light:

i.

Attach the 12 clamps to install the No. 2 frame wire.


ii.

Connect the 4 connectors.



c.

w/o TOYOTA Parking Assist-sensor System, w/ Rear Fog Light:

i.

Attach the 13 clamps to install the No. 2 frame wire.


ii.

Connect the 2 connectors.