Home › Vehicle Exterior › WINCH › WINCH UNIT › from 2015.08
RM2660E _59 Vehicle Exterior _052858 WINCH _0255863 WINCH UNIT A

WINCH  WINCH UNIT  INSTALLATION  


PROCEDURE

Hide 38110 1.INSTALL WINCH ASSEMBLY

a.
B187919

Using a crane or equivalent, install the winch assembly.

CAUTION:

Be careful as the winch assembly is very heavy.



b.
B185177

Connect the wire with the nut.

Torque:
9.3 N*m (95 kgf*cm, 83 in.*lbf)


c.

Connect the connector.


d.
B187918

Move the cover in the direction indicated by the arrow shown in the illustration and attach the 2 claws.


e.
U163959E01
0.177,1.083 0.296,1.226 0.119,0.143 10 A 2.079,1.148 2.193,1.294 0.114,0.146 10 B 3.197,0.599 3.320,0.741 0.122,0.142 10 A 0.373,3.767 0.503,3.909 0.131,0.142 10 A 3.107,3.776 3.232,3.918 0.125,0.142 10 A

Install the mounting bracket with the 9 bolts.

Torque:
for bolt A : 33 N*m (336 kgf*cm, 24 ft.*lbf)
for bolt B : 19 N*m (194 kgf*cm, 15 ft.*lbf)


Hide 32917 2.INSTALL TRANSMISSION OIL COOLER AIR DUCT (w/ Air Cooled Transmission Oil Cooler)

Hide 53294C 3.INSTALL RADIATOR SIDE DEFLECTOR LH

Hide 53293C 4.INSTALL RADIATOR SIDE DEFLECTOR RH (w/o Air Cooled Transmission Oil Cooler)