Home › Vehicle Exterior › WINCH › RELAY › from 2015.08
RM2660E _59 Vehicle Exterior _052858 WINCH _0255865 RELAY A

WINCH  RELAY  INSTALLATION  


PROCEDURE

Hide 1.INSTALL WINCH MAIN RELAY

a.

Install the relay with the 3 nuts.

Torque:
9.3 N*m (95 kgf*cm, 83 in.*lbf)


b.

Connect the 2 wires with the 2 nuts.

Torque:
9.4 N*m (96 kgf*cm, 84 in.*lbf)


c.

Connect the connector.

B180493


Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).