Home › Drivetrain › AC60F (AUTOMATIC TRANSMISSION / TRANSAXLE) › SHIFT LEVER › from 2017.08
RM2660E _52 Drivetrain _066407 AC60F AUTOMATIC TRANSMISSION / TRANSAXLE _0323661 SHIFT LEVER A

AC60F AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER  INSTALLATION  


PROCEDURE

Hide 1.INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY

U156486E02
0.75,1.104 0.865,1.26 0.115,0.156 10 false 3 2.667,0.229 2.781,0.385 0.115,0.156 10 false 4 2.802,1.042 2.969,1.208 0.167,0.167 10 false 2 0.875,0.094 0.99,0.25 0.115,0.156 10 false 1

a.

Install the transmission floor shift assembly with the 4 bolts. Tighten the bolts in the order shown in the illustration.

Torque:
14 N*m (143 kgf*cm, 10 ft.*lbf)

Text in Illustration
V100135

Bolt
V100136

Connector


b.

Connect the 3 connectors.


Hide 33702B 2.CONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY

C172427E01
1.046,0.14 1.183,0.318 0.137,0.177 10 P 1.511,0.278 1.649,0.455 0.137,0.177 10 R 1.76,0 1.898,0.177 0.137,0.177 10 N

a.

Turn the transmission control shaft lever of the park/neutral position switch counterclockwise until it stops, and then turn it clockwise 2 notches to set it to the N position.


b.

Move the shift lever to N.


c.
C172428E06
1.917,0.604 1.344,0.281 1.344,0.281 1.24,0.281 true 0.979,0.188 1.219,0.375 0.24,0.188 10 false *a

Temporarily install the floor shift gear shifting rod sub-assembly to the transmission floor shift assembly with the nut.


d.

Tighten the nut while lightly pushing the lever rearward.

Torque:
13 N*m (133 kgf*cm, 10 ft.*lbf)

Text in Illustration
*a Lever
V100135

Nut
V100136

Push