The ECM continuously monitors its main and sub CPUs. This self-check ensures that the ECM is functioning properly. If outputs from the CPUs are different and deviate from the standard, the ECM will illuminate the MIL and store DTC(s) immediately.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| P0606 | When either condition below is met:
·
An ECM main CPU error. ·
An ECM sub CPU error. |
ECM |
Turn the engine switch off.
Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.
Connect the cable to the negative (-) battery terminal.
Turn the engine switch on (IG).
Check DTC.
P0606 is not output.
OK
NG