The ECM monitors the input signals of the Accelerator Pedal Position (APP) sensor No. 1. When the input signals and control signals are deviated, a DTC is stored.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| P060D | When either condition below is met:
·
An ECM main CPU error. ·
An ECM sub CPU error. |
ECM |
Turn the engine switch off.
Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.
Connect the cable to the negative (-) battery terminal.
Turn the engine switch on (IG).
Check DTC.
P060D is not output.
OK
NG