Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › SFI SYSTEM › from 2017.08
RM2660E _51 Engine / Hybrid System _052774 1GR-FE ENGINE CONTROL _0255001 SFI SYSTEM C

1GR-FE ENGINE CONTROL  SFI SYSTEM  P0010  Camshaft Position "A" Actuator Circuit (Bank 1)  P0020  Camshaft Position "A" Actuator Circuit (Bank 2)  


DESCRIPTION

·

These DTCs are designed to detect opens or shorts in the camshaft timing oil control valve circuit. If the duty-cycle for the camshaft timing oil control valve is excessively high or low while the engine is running, the ECM will illuminate the MIL and store the DTC.

·

The VVT (Variable Valve Timing) system adjusts the intake valve timing to improve driveability. The engine oil pressure turns the camshaft actuator to adjust the valve timing. The camshaft timing oil control valve is a solenoid valve and switches the engine oil line. The valve moves when the ECM applies 12 V to the solenoid. The ECM changes the energizing time of the solenoid (duty-cycle) in accordance with the camshaft position, crankshaft position, throttle position, etc.


A192077E13
4.483,0.815 5.318,1.026 0.834,0.211 10 VVT Sensor 4.483,1.325 6.234,1.485 1.751,0.161 10 Crankshaft Position Sensor 0.068,0.015 1.618,0.267 1.550,0.253 10 VVT System: 2.333,1.96 3.609,2.134 1.277,0.174 10 Target Valve Timing 2.333,1.287 3.609,1.462 1.277,0.174 10 Actual Valve Timing 2.683,2.695 3.397,2.870 0.714,0.174 10 Correction 2.822,3.204 3.223,3.378 0.402,0.174 10 ECM 1.599,3.747 3.765,3.922 2.166,0.174 10 Camshaft Timing Oil Control Valve 0.166,2.69 0.860,2.864 0.695,0.174 10 Duty-cycle 4.483,1.827 5.818,1.981 1.334,0.154 10 Mass Air Flow Meter 4.483,2.854 6.799,3.042 2.316,0.188 10 Engine Coolant Temperature Sensor 4.483,2.344 6.049,2.511 1.566,0.167 10 Throttle Position Sensor 4.483,3.353 5.929,3.506 1.446,0.154 10 Vehicle Speed Sensor 0.313,4.269 1.682,4.474 1.369,0.205 10 Engine Oil Pressure 3.659,4.217 4.885,4.400 1.225,0.184 10 Camshaft Actuator 3.883,4.917 4.984,5.101 1.100,0.184 10 Intake Camshaft 2.562,4.571 2.842,4.275 2.842,4.275 3.607,4.275 false 3.177,4.781 3.32,5.008 3.32,5.008 3.852,5.008 false

DTC No. DTC Detection Condition Trouble Area
P0010 Open or short in the camshaft timing oil control valve (for intake side of bank 1) circuit (1 trip detection logic).
·

Open or short in camshaft timing oil control valve (for intake side of bank 1) circuit

·

Camshaft timing oil control valve assembly (for intake side of bank 1)

·

ECM


P0020 Open or short in the camshaft timing oil control valve (for intake side of bank 2) circuit (1 trip detection logic).
·

Open or short in camshaft timing oil control valve (for intake side of bank 2) circuit

·

Camshaft timing oil control valve assembly (for intake side of bank 2)

·

ECM



HINT:

These DTCs relate to the camshaft timing oil control valves.


MONITOR DESCRIPTION

These DTCs are designed to detect opens or shorts in the camshaft timing oil control valve circuit. If the duty-cycle for the camshaft timing oil control valve is excessively high or low while the engine is running, the ECM will illuminate the MIL and store the DTC.

WIRING DIAGRAM

for Manual Transmission Models
A160561E18
0.573,3.719 0.896,3.875 0.323,0.156 10 false C28 0.573,3.885 2.75,4.375 2.177,0.49 10 false Camshaft Timing Oil Control Valve (for Intake Side of Bank 2) 0.573,1.906 2.688,2.344 2.115,0.438 10 false Camshaft Timing Oil Control Valve (for Intake Side of Bank 1) 1.448,0.615 1.615,0.781 0.167,0.167 10 false 1 1.469,1.354 1.635,1.521 0.167,0.167 10 false 2 0.573,1.76 0.896,1.917 0.323,0.156 10 false C27 1.448,2.573 1.615,2.74 0.167,0.167 10 false 1 1.458,3.323 1.625,3.49 0.167,0.167 10 false 2 5.156,0.615 5.385,0.76 0.229,0.146 10 false 58 5.427,0.615 5.844,0.76 0.417,0.146 10 false OC1+ 5.167,1.344 5.396,1.49 0.229,0.146 10 false 57 5.438,1.344 5.854,1.49 0.417,0.146 10 false OC1- 5.167,2.583 5.396,2.729 0.229,0.146 10 false 52 5.417,2.583 5.833,2.729 0.417,0.146 10 false OC2+ 5.167,3.313 5.396,3.458 0.229,0.146 10 false 51 5.448,3.313 5.865,3.458 0.417,0.146 10 false OC2- 5.594,4.219 6.667,4.385 1.073,0.167 10 false C45 5.594,4.375 6.021,4.521 0.427,0.146 10 false ECM


for Automatic Transmission Models
A160561E17
0.573,3.719 0.896,3.875 0.323,0.156 10 false C28 0.573,3.885 2.75,4.375 2.177,0.49 10 false Camshaft Timing Oil Control Valve (for Intake Side of Bank 2) 0.573,1.906 2.688,2.344 2.115,0.438 10 false Camshaft Timing Oil Control Valve (for Intake Side of Bank 1) 1.448,0.615 1.615,0.781 0.167,0.167 10 false 1 1.469,1.354 1.635,1.521 0.167,0.167 10 false 2 0.573,1.76 0.896,1.917 0.323,0.156 10 false C27 1.448,2.573 1.615,2.74 0.167,0.167 10 false 1 1.458,3.323 1.625,3.49 0.167,0.167 10 false 2 5.156,0.615 5.385,0.76 0.229,0.146 10 false 6 5.427,0.615 5.844,0.76 0.417,0.146 10 false OC1+ 5.167,1.344 5.396,1.49 0.229,0.146 10 false 5 5.438,1.344 5.854,1.49 0.417,0.146 10 false OC1- 5.167,2.583 5.396,2.729 0.229,0.146 10 false 4 5.417,2.583 5.833,2.729 0.417,0.146 10 false OC2+ 5.167,3.313 5.396,3.458 0.229,0.146 10 false 3 5.448,3.313 5.865,3.458 0.417,0.146 10 false OC2- 5.594,4.219 6.667,4.385 1.073,0.167 10 false C45 5.594,4.375 6.021,4.521 0.427,0.146 10 false ECM


CAUTION / NOTICE / HINT

HINT:
·

Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, if the air-fuel ratio was lean or rich, and other data from the time the malfunction occurred.

·

Bank 1 refers to the bank that includes the No. 1 cylinder*.

*: The No. 1 cylinder is the cylinder which is farthest from the transmission.

·

Bank 2 refers to the bank that does not include the No. 1 cylinder.



PROCEDURE

1.CHECK DTC (DTC P0010 OR P0020)
a.

Clear the DTCs after recording the freeze frame data and DTCs.


b.

Turn the ignition switch off.


c.

Allow the engine to idle and check for DTCs.


d.

Check that P0010 or P0020 is output.

OK:

P0010 or P0020 is output.




OK

2.INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

NG

2.INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
a.

Inspect the camshaft timing oil control valve assembly (for Intake Side of Bank 1, 2) (See page Engine / Hybrid System>1GR-FE (ENGINE CONTROL)>CAMSHAFT OIL CONTROL VALVE>INSPECTION).



OK

3.CHECK HARNESS AND CONNECTOR (CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY - ECM)

NG

REPLACE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

3.CHECK HARNESS AND CONNECTOR (CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY - ECM)
a.

Disconnect the camshaft timing oil control valve assembly connector.


b.

Disconnect the ECM connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
for Manual Transmission Models
Tester Connection Condition Specified Condition
C27-1 - C45-58 (OC1+) Always Below 1 Ω
C28-1 - C45-52 (OC2+) Always Below 1 Ω
C27-2 - C45-57 (OC1-) Always Below 1 Ω
C28-2 - C45-51 (OC2-) Always Below 1 Ω
C27-1 or C45-58 (OC1+) - Body ground Always 10 kΩ or higher
C28-1 or C45-52 (OC2+) - Body ground Always 10 kΩ or higher
C27-2 or C45-57 (OC1-) - Body ground Always 10 kΩ or higher
C28-2 or C45-51 (OC2-) - Body ground Always 10 kΩ or higher

for Automatic Transmission Models
Tester Connection Condition Specified Condition
C27-1 - C45-6 (OC1+) Always Below 1 Ω
C28-1 - C45-4 (OC2+) Always Below 1 Ω
C27-2 - C45-5 (OC1-) Always Below 1 Ω
C28-2 - C45-3 (OC2-) Always Below 1 Ω
C27-1 or C45-6 (OC1+) - Body ground Always 10 kΩ or higher
C28-1 or C45-4 (OC2+) - Body ground Always 10 kΩ or higher
C27-2 or C45-5 (OC1-) - Body ground Always 10 kΩ or higher
C28-2 or C45-3 (OC2-) - Body ground Always 10 kΩ or higher




OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR