Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › SFI SYSTEM › from 2017.08
RM2660E _51 Engine / Hybrid System _052774 1GR-FE ENGINE CONTROL _0255001 SFI SYSTEM C

1GR-FE ENGINE CONTROL  SFI SYSTEM  P0013  Camshaft Position "B" Actuator Circuit / Open (Bank 1)  P0023  Camshaft Position "B" Actuator Circuit / Open (Bank 2)  


DESCRIPTION

·

These DTCs are designed to detect opens or shorts in the camshaft timing oil control valve circuit. If the duty-cycle for the camshaft timing oil control valve is excessively high or low while the engine is running, the ECM will illuminate the MIL and store the DTC.

·

The VVT (Variable Valve Timing) system adjusts the exhaust valve timing to improve driveability. The engine oil pressure turns the camshaft actuator to adjust the valve timing. The camshaft timing oil control valve is a solenoid valve and switches the engine oil line. The valve moves when the ECM applies 12 V to the solenoid. The ECM changes the energizing time of the solenoid (duty-cycle) in accordance with the camshaft position, crankshaft position, throttle position, etc.


A192077E14
4.483,0.815 5.318,1.026 0.834,0.211 10 VVT Sensor 4.483,1.325 6.234,1.485 1.751,0.161 10 Crankshaft Position Sensor 0.068,0.015 1.618,0.267 1.550,0.253 10 VVT System: 2.333,1.96 3.609,2.134 1.277,0.174 10 Target Valve Timing 2.333,1.287 3.609,1.462 1.277,0.174 10 Actual Valve Timing 2.683,2.695 3.397,2.870 0.714,0.174 10 Correction 2.822,3.204 3.223,3.378 0.402,0.174 10 ECM 1.599,3.747 3.765,3.922 2.166,0.174 10 Camshaft Timing Oil Control Valve 0.166,2.69 0.860,2.864 0.695,0.174 10 Duty-cycle 4.483,1.827 5.818,1.981 1.334,0.154 10 Mass Air Flow Meter 4.483,2.854 6.799,3.042 2.316,0.188 10 Engine Coolant Temperature Sensor 4.483,2.344 6.049,2.511 1.566,0.167 10 Throttle Position Sensor 4.483,3.353 5.929,3.506 1.446,0.154 10 Vehicle Speed Sensor 0.313,4.269 1.682,4.474 1.369,0.205 10 Engine Oil Pressure 3.659,4.217 4.885,4.400 1.225,0.184 10 Camshaft Actuator 3.883,4.917 5.067,5.101 1.184,0.184 10 Exhaust Camshaft 2.562,4.571 2.842,4.275 2.842,4.275 3.607,4.275 false 3.177,4.781 3.32,5.008 3.32,5.008 3.852,5.008 false

DTC No. DTC Detection Condition Trouble Area
P0013 Open or short in the camshaft timing oil control valve (for exhaust side of bank 1) circuit (1 trip detection logic).
·

Open or short in camshaft timing oil control valve (for exhaust side of bank 1) circuit

·

Camshaft timing oil control valve assembly (for exhaust side of bank 1)

·

ECM


P0023 Open or short in the camshaft timing oil control valve (for exhaust side of bank 2) circuit (1 trip detection logic).
·

Open or short in camshaft timing oil control valve (for exhaust side of bank 2) circuit

·

Camshaft timing oil control valve assembly (for exhaust side of bank 2)

·

ECM



MONITOR DESCRIPTION

These DTCs are designed to detect opens or shorts in the camshaft timing oil control valve circuit. If the duty-cycle for the camshaft timing oil control valve is excessively high or low while the engine is running, the ECM will illuminate the MIL and store the DTC.

WIRING DIAGRAM

for Manual Transmission Models
A160561E19
0.573,3.719 1.333,3.896 0.76,0.177 10 false C170 0.573,3.885 2.771,4.365 2.198,0.479 10 false Camshaft Timing Oil Control Valve (for Exhaust Side of Bank 2) 0.573,1.906 2.771,2.302 2.198,0.396 10 false Camshaft Timing Oil Control Valve (for Exhaust Side of Bank 1) 1.448,0.615 1.615,0.781 0.167,0.167 10 false 1 1.469,1.354 1.635,1.521 0.167,0.167 10 false 2 0.573,1.76 1.021,1.906 0.448,0.146 10 false C169 1.448,2.573 1.615,2.74 0.167,0.167 10 false 1 1.458,3.323 1.625,3.49 0.167,0.167 10 false 2 5.156,0.615 5.385,0.76 0.229,0.146 10 false 56 5.427,0.615 5.917,0.917 0.49,0.302 10 false OE1+ 5.167,1.344 5.396,1.49 0.229,0.146 10 false 55 5.438,1.344 5.885,1.604 0.448,0.26 10 false OE1- 5.167,2.583 5.396,2.729 0.229,0.146 10 false 50 5.417,2.583 5.885,2.844 0.469,0.26 10 false OE2+ 5.167,3.313 5.396,3.458 0.229,0.146 10 false 49 5.438,3.313 5.906,3.594 0.469,0.281 10 false OE2- 5.615,4.219 6.771,4.438 1.156,0.219 10 false C45 5.594,4.375 6.094,4.573 0.5,0.198 10 false ECM


for Automatic Transmission Models
A160561E20
0.573,3.719 1.333,3.896 0.76,0.177 10 false C170 0.573,3.885 2.771,4.365 2.198,0.479 10 false Camshaft Timing Oil Control Valve (for Exhaust Side of Bank 2) 0.573,1.906 2.771,2.302 2.198,0.396 10 false Camshaft Timing Oil Control Valve (for Exhaust Side of Bank 1) 1.448,0.615 1.615,0.781 0.167,0.167 10 false 1 1.469,1.354 1.635,1.521 0.167,0.167 10 false 2 0.573,1.76 1.021,1.906 0.448,0.146 10 false C169 1.448,2.573 1.615,2.74 0.167,0.167 10 false 1 1.458,3.323 1.625,3.49 0.167,0.167 10 false 2 5.156,0.615 5.385,0.76 0.229,0.146 10 false 2 5.427,0.615 5.917,0.917 0.49,0.302 10 false OE1+ 5.167,1.344 5.396,1.49 0.229,0.146 10 false 1 5.438,1.344 5.885,1.604 0.448,0.26 10 false OE1- 5.115,2.583 5.344,2.729 0.229,0.146 10 false 24 5.417,2.583 5.885,2.844 0.469,0.26 10 false OE2+ 5.125,3.313 5.354,3.458 0.229,0.146 10 false 47 5.438,3.313 5.906,3.594 0.469,0.281 10 false OE2- 5.594,4.219 6.75,4.438 1.156,0.219 10 false C45 5.594,4.375 6.094,4.573 0.5,0.198 10 false ECM


CAUTION / NOTICE / HINT

HINT:
·

If DTC P0013 is output, check the bank 1 VVT system for the exhaust camshaft circuit.

·

Bank 1 refers to the bank that includes the No. 1 cylinder*.

*: The No. 1 cylinder is the cylinder which is farthest from the transmission.

·

If DTC P0023 is output, check the bank 2 VVT system for the exhaust camshaft circuit.

·

Bank 2 refers to the bank that does not include the No. 1 cylinder.

·

Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, if the air-fuel ratio was lean or rich, and other data from the time the malfunction occurred.



PROCEDURE

1.CHECK DTC (DTC P0013 OR P0023)
a.

Connect the GTS to the DLC3.


b.

Clear the DTCs after recording the freeze frame data and DTCs.


c.

Turn the ignition switch off.


d.

Allow the engine to idle and check DTCs.


e.

Check that P0013 or P0023 is output.

OK:

P0013 or P0023 is output.




OK

2.INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

NG

2.INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
a.

Inspect the camshaft timing oil control valve assembly (for Exhaust Side of Bank 1, 2) (See page Engine / Hybrid System>1GR-FE (ENGINE CONTROL)>CAMSHAFT OIL CONTROL VALVE>INSPECTION).



OK

3.CHECK HARNESS AND CONNECTOR (CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY - ECM)

NG

REPLACE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

3.CHECK HARNESS AND CONNECTOR (CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY - ECM)
a.

Disconnect the camshaft timing oil control valve assembly connector.


b.

Disconnect the ECM connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
for Manual Transmission Models
Tester Connection Condition Specified Condition
C169-1 - C45-56 (OE1+) Always Below 1 Ω
C169-2 - C45-55 (OE1-) Always Below 1 Ω
C170-1 - C45-50 (OE2+) Always Below 1 Ω
C170-2 - C45-49 (OE2-) Always Below 1 Ω
C169-1 or C45-56 (OE1+) - Body ground Always 10 kΩ or higher
C169-2 or C45-55 (OE1-) - Body ground Always 10 kΩ or higher
C170-1 or C45-50 (OE2+) - Body ground Always 10 kΩ or higher
C170-2 or C45-49 (OE2-) - Body ground Always 10 kΩ or higher

for Automatic Transmission Models
Tester Connection Condition Specified Condition
C169-1 - C45-2 (OE1+) Always Below 1 Ω
C169-2 - C45-1 (OE1-) Always Below 1 Ω
C170-1 - C45-24 (OE2+) Always Below 1 Ω
C170-2 - C45-47 (OE2-) Always Below 1 Ω
C169-1 or C45-2 (OE1+) - Body ground Always 10 kΩ or higher
C169-2 or C45-1 (OE1-) - Body ground Always 10 kΩ or higher
C170-1 or C45-24 (OE2+) - Body ground Always 10 kΩ or higher
C170-2 or C45-47 (OE2-) - Body ground Always 10 kΩ or higher




OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR