Home › Vehicle Interior › PRE-CRASH SAFETY › PRE-CRASH SAFETY SYSTEM › from 2017.08
RM2660E _58 Vehicle Interior _052844 PRE-CRASH SAFETY _0255621 PRE-CRASH SAFETY SYSTEM D

PRE-CRASH SAFETY  PRE-CRASH SAFETY SYSTEM  DIAGNOSIS SYSTEM  



FUNCTION OF WARNING INDICATOR AND MESSAGE


a.

If the pre-crash safety system is not functioning properly, the driver is warned by the PCS OFF warning light and multi-information display warning message on the combination meter.

Master Warning Indicator Warning Message Detail DTC PCS OFF warning light
Illuminated Pre-crash Safety Malfunction Visit Your Dealer Pre-crash safety system is malfunctioning Stored Blinks
Not illuminated Pre-crash Safety Unavailable
·

Millimeter wave radar sensor assembly misaligned

·

Millimeter wave radar sensor assembly temperature malfunction

·

Millimeter wave radar sensor assembly low voltage malfunction


Not stored Blinks
Not illuminated Pre-crash Safety Unavailable Clean Sensor Foreign matter attached to millimeter wave radar sensor assembly Not stored Blinks
Not illuminated Forward Camera Systems Unavailable Forward recognition camera temporarily malfunctioning
·

Abnormal forward recognition camera voltage

·

Forward recognition camera temperature outside of operational range

·

Other forward recognition camera malfunction


Not stored Blinks
Not illuminated Forward Camera Systems Unavailable Clean Windshield The forward recognition camera or windshield glass within the field of view of the forward recognition camera is dirty or fogged up Not stored Illuminates
Not illuminated VSC Turned Off Pre-crash Safety Unavailable VSC system is disabled Not stored Illuminates

PCS Warning Light Illumination Status
PCS Warning Light Condition
Blinks ON: 0.5 sec./OFF: 1.5 sec. Pre-crash safety system malfunctioning (DTC stored)
Pre-crash safety system temporarily unavailable (when camera is not dirty or fogged up)
Illuminates Pre-crash safety system temporarily unavailable (only when camera is dirty or fogged up)
Pre-crash safety system disabled
VSC system disabled
Not illuminated Other



Initial check


a.

An initial check is performed when the engine switch off for more than 2 seconds and then turned on (IG). The initial check consists of a pre-crash safety system diagnostic check with a duration of approximately 3 seconds.


b.

If a malfunction is detected during the initial check, the PCS OFF warning light in the combination meter assembly will blink or illuminates and a warning message indicating the pre-crash safety system is malfunctioning or disabled will be displayed on the multi-information display.



Constant check


a.

The driving support ECU assembly constantly monitors the pre-crash safety system for malfunctions after the engine switch is turned on (IG) and the initial check (approximately 3 seconds) has completed.


b.

If a malfunction is detected during the constant check, the PCS OFF warning light in the combination meter assembly will blink or illuminates and a warning message indicating the pre-crash safety system is malfunctioning or disabled will be displayed on the multi-information display.