A bolt without a torque specification is shown in the standard bolt chart.
Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS
57616B
1.INSTALL REAR BUMPER ARM BRACKET LH
Install the rear bumper arm bracket LH with the 2 bolts.
Attach the clamp.
57615C
2.INSTALL REAR BUMPER ARM BRACKET
Install the rear bumper arm bracket with the bolt.
Use the same procedure for both bumper arm brackets.
52172B
3.INSTALL REAR BUMPER NO. 2 REINFORCEMENT
Install the rear bumper No. 2 reinforcement with the 2 bolts.
52156A
4.INSTALL REAR BUMPER SIDE SUPPORT LH
Attach the 6 claws to install the rear bumper side support LH.
Install the 3 screws.
52155A
5.INSTALL REAR BUMPER SIDE SUPPORT RH
Use the same procedure described for the LH side.
52563D
6.INSTALL REAR BUMPER UPPER RETAINER LH
Attach the 2 clips to install the rear bumper upper retainer LH.
52562E
7.INSTALL REAR BUMPER UPPER RETAINER RH
Use the same procedure described for the LH side.
81561D
8.INSTALL REAR COMBINATION LIGHT ASSEMBLY LH
81551D
9.INSTALL REAR COMBINATION LIGHT ASSEMBLY RH
Use the same procedure described for the LH side.
58724B
10.INSTALL NO. 2 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR
Install the No. 2 luggage compartment side cover protector with 2 new grommets.
Install the 2 screws.
58723B
11.INSTALL NO. 1 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR
Use the same procedure described for the LH side.
52159
12.INSTALL REAR BUMPER COVER
w/ TOYOTA Parking Assist-sensor System:
Connect the No. 2 frame wire connector.
Attach the 14 claws to install the rear bumper cover.
Install the 7 bolts, 6 screws and 2 clips.
Open the tail gate and install the 4 clips.
Close the tail gate.
52162B
13.INSTALL REAR BUMPER NO. 1 PLATE (for Step)
Attach the 20 claws to install the rear bumper No. 1 plate.
76626E
14.INSTALL REAR QUARTER PANEL MUDGUARD LH
76625G
15.INSTALL REAR QUARTER PANEL MUDGUARD RH