| *A | w/o Power Back Door | *B | w/ Power Back Door |
| *1 | CONNECTOR | - | - |
1.REMOVE REAR WIPER ARM AND BLADE ASSEMBLY
|
Disengage in this Direction | - | - |
67939B 2.REMOVE BACK DOOR CENTER GARNISH
67938A 3.REMOVE BACK DOOR SIDE GARNISH LH
67937B 4.REMOVE BACK DOOR SIDE GARNISH RH
Use the same procedure as for the LH side.
64780A 8.REMOVE BACK DOOR TRIM PANEL ASSEMBLY
85110R 9.REMOVE REAR WIPER MOTOR ASSEMBLY
Disconnect the connector.
Detach the clamp.
Loosen the 3 bolts and rear wiper motor assembly.
Be careful not to scratch the back door glass.
85143R 10.REMOVE REAR WIPER MOTOR GROMMET