| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | SYMBOL EMBLEM | 75741E | ( ) |
- | - |
| 2 | BACK DOOR NAME PLATE | 75441B | ( ) |
- | - |
| 3 | BACK DOOR NAME PLATE | 75441C | ( ) |
- | - |
| 4 | REAR BODY NO. 3 NAME PLATE | 75473B | ( ) |
- | - |
| ● | Non-reusable part | - | - |
| *A | w/o Power Back Door | *B | w/ Power Back Door |
| *A | w/ Back Door Speaker | *B | w/ Power Back Door |
| *C | w/o Power Back Door | - | - |
| *A | w/ Power Back Door | *B | w/o Power Back Door |
| *C | w/ Camera | *D | w/o Washer |
| *E | w/ Washer | - | - |
| ● | Non-reusable Part | - | - |
| *A | w/o Power Back Door | *B | w/ Power Back Door |
| *1 | GROMMET | - | - |
| ● | Non-reusable Part | ★ | Precoated part |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 47 | CAMERA CLEANER HOSE ASSEMBLY | 867F2A | - | - | - |
| 48 | WINDSHIELD WASHER HOSE ASSEMBLY | 85370 | - | - | - |
| 49 | NO. 1 BACK DOOR WIRE | 82184 | - | - | - |
| 50 | NO. 2 BACK DOOR WIRE | 82185 | - | - | - |
| 51 | NO. 2 REAR WINDOW WIRE | 82187 | - | - | - |
| 52 | NO. 1 REAR WINDOW WIRE | 82186 | - | - | - |
| *A | w/ Washer | - | - |
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during the back door disassembly/reassembly are shown below.
When the cable is disconnected/reconnected to the auxiliary battery terminal, systems temporarily stop operating. However, each system has a function that completes learning the first time the system is used.
Learning completes when vehicle is driven
Learning completes when vehicle is operated normally
74811G 5.REMOVE DOOR PULL HANDLE (w/o Power Back Door)
Use the same procedures for the opposite side.
Using a moulding remover D, disengage the claws and guides to remove the door pull handle.
64785A 6.REMOVE BACK DOOR TRIM BASE (w/ Power Back Door)
Using a moulding remover D, disengage the claws and guides to remove the back door trim base.
74811B 7.REMOVE DOOR PULL HANDLE (w/ Power Back Door)
|
Place Hands Hrere |
|
Remove in this Direction |
Using a moulding remover D, disengage the claws to remove the door pull handle.
Disconnect the 2 connectors.
69321 8.REMOVE BACK DOOR LOCK COVER
Using a moulding remover D, disengage the claw and guides to remove the back door lock cover.
67939B 9.REMOVE BACK DOOR CENTER GARNISH
|
Place Hands Hrere |
|
Remove in this Direction (1) |
|
Remove in this Direction (2) | - | - |
67938A 10.REMOVE BACK DOOR SIDE GARNISH LH
|
Place Hands Hrere |
|
Remove in this Direction (1) |
|
Remove in this Direction (2) | - | - |
67937B 11.REMOVE BACK DOOR SIDE GARNISH RH
Use the same procedure as for the LH side.
67847A 12.REMOVE BACK DOOR SERVICE HOLE COVER
Using a moulding remover A, disengage the claws and guides to remove the back door service hole cover.
64780A 13.REMOVE BACK DOOR TRIM PANEL ASSEMBLY
|
Place Hands Hrere |
|
Remove in this Direction (1) |
|
Remove in this Direction (2) | - | - |
69350P 15.REMOVE BACK DOOR LOCK WITH COURTESY LIGHT SWITCH ASSEMBLY
16.REMOVE REAR WIPER ARM AND BLADE ASSEMBLY
85143R 18.REMOVE REAR WIPER MOTOR GROMMET
19.REMOVE HOLE PLUG
64885C 21.REMOVE BACK DOOR GLASS CHANNEL RH (w/o Power Back Door)
Use the same procedure as for the LH side.
812D0 24.REMOVE LICENSE PLATE LIGHT WITH BACK DOOR OPENER SWITCH ASSEMBLY
86790D 25.REMOVE REAR TELEVISION CAMERA ASSEMBLY (w/ Camera)
81580A 27.REMOVE REAR LIGHT ASSEMBLY RH
Use the same procedure as for the LH side.
28.REMOVE REAR BUMPER ASSEMBLY
for Standard:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>REAR BUMPER (for Standard)>REMOVAL
for Aero Type:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>REAR BUMPER (for Aero Type)>REMOVAL
84270G 30.REMOVE POWER BACK DOOR SENSOR ASSEMBLY RH (w/ Power Back Door)
Use the same procedure as for the LH side.
68910A 32.REMOVE POWER BACK DOOR DRIVE UNIT ASSEMBLY SET RH (w/ Power Back Door)
Use the same procedure as for the LH side.
68946 33.REMOVE BACK DOOR DAMPER STAY UPPER BRACKET LH (w/ Power Back Door)
68945 34.REMOVE BACK DOOR DAMPER STAY UPPER BRACKET RH (w/ Power Back Door)
Use the same procedure as for the LH side.
68948 35.REMOVE BACK DOOR DAMPER STAY LOWER BRACKET LH (w/ Power Back Door)
68947 36.REMOVE BACK DOOR DAMPER STAY LOWER BRACKET RH (w/ Power Back Door)
Use the same procedure as for the LH side.
68950C 38.REMOVE BACK DOOR STAY ASSEMBLY RH (w/o Power Back Door)
Use the same procedure as for the back door stay set LH side.
68946 39.REMOVE BACK DOOR DAMPER STAY UPPER BRACKET LH (w/o Power Back Door)
68945 40.REMOVE BACK DOOR DAMPER STAY UPPER BRACKET RH (w/o Power Back Door)
Use the same procedure as for the LH side.
68948 41.REMOVE BACK DOOR DAMPER STAY LOWER BRACKET LH (w/o Power Back Door)
68947 42.REMOVE BACK DOOR DAMPER STAY LOWER BRACKET RH (w/o Power Back Door)
Use the same procedure as for the LH side.
69462 43.REMOVE BACK DOOR SIDE MALE STOPPER LH
69461 44.REMOVE BACK DOOR SIDE MALE STOPPER RH
Use the same procedure as for the LH side.
69478 45.REMOVE BACK DOOR LOWER STOPPER CUSHION
|
|
67837L 46.REMOVE DOOR DUST PROOF SEAL
867F2A 47.REMOVE CAMERA CLEANER HOSE ASSEMBLY (w/ Washer)
85370 48.DISCONNECT WINDSHIELD WASHER HOSE ASSEMBLY
82184 49.DISCONNECT NO. 1 BACK DOOR WIRE
| *A | w/ Camera | - | - |
82185 50.DISCONNECT NO. 2 BACK DOOR WIRE
| *A | w/ Camera | *B | w/ Back Door Speaker |
| *C | w/ Power Back Door | - | - |
82187 51.DISCONNECT NO. 2 REAR WINDOW WIRE
82186 52.DISCONNECT NO. 1 REAR WINDOW WIRE