Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
58903A 1.REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY
85530D 2.REMOVE NO. 2 POWER OUTLET SOCKET ASSEMBLY
|
Remove in this Direction | - | - |
Using a screwdriver with its tip wrapped with protective tape, detach the claw and remove the No. 2 power outlet socket assembly from the console rear end panel sub-assembly.
85535E 3.REMOVE NO. 2 POWER OUTLET SOCKET COVER
|
Remove in this Direction | - | - |
85532C 4.REMOVE NO. 2 USB CHARGER SOCKET
|
Remove in this Direction | - | - |