|
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| ★ | Precoated part | - | - |
This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
15370D 1.INSTALL CAM TIMING OIL CONTROL SOLENOID O-RING RH (for Exhaust Side of Bank 1)
Clean the O-ring groove of the cam timing oil control solenoid assembly RH (for Exhaust Side of Bank 1).
Make sure the O-ring groove is free of foreign matter.
Install a new cam timing oil control solenoid O-ring RH (for Exhaust Side of Bank 1) to the cam timing oil control solenoid assembly RH (for Exhaust Side of Bank 1).
Do not damage the cam timing oil control solenoid O-ring RH (for Exhaust Side of Bank 1) when installing it.
15370B 2.INSTALL CAM TIMING OIL CONTROL SOLENOID ASSEMBLY RH (for Exhaust Side of Bank 1)
Apply a light coat of engine oil to the cam timing oil control solenoid O-ring RH (for Exhaust Side of Bank 1).
If reusing the cam timing oil control solenoid assembly RH (for Exhaust Side of Bank 1), be sure to inspect the cam timing oil control solenoid O-ring RH (for Exhaust Side of Bank 1).
Install the cam timing oil control solenoid assembly RH (for Exhaust Side of Bank 1) to the timing chain or belt cover sub-assembly with the 2 new bolts.
If the cam timing oil control solenoid assembly RH (for Exhaust Side of Bank 1) has been struck or dropped, replace it.
Make sure that the O-ring is not cracked or moved out of place when installing the cam timing oil control solenoid assembly RH (for Exhaust Side of Bank 1).
Connect the cam timing oil control solenoid assembly RH (for Exhaust Side of Bank 1) connector.
15370D 3.INSTALL CAM TIMING OIL CONTROL SOLENOID O-RING RH (for Intake Side of Bank 1)
Clean the O-ring groove of the cam timing oil control solenoid assembly RH (for Intake Side of Bank 1).
Make sure the O-ring groove is free of foreign matter.
Install a new cam timing oil control solenoid O-ring RH (for Intake Side of Bank 1) to the cam timing oil control solenoid assembly RH (for Intake Side of Bank 1).
Do not damage the cam timing oil control solenoid O-ring RH (for Intake Side of Bank 1) when installing it.
15370B 4.INSTALL CAM TIMING OIL CONTROL SOLENOID ASSEMBLY RH (for Intake Side of Bank 1)
Apply a light coat of engine oil to the cam timing oil control solenoid O-ring RH (for Intake Side of Bank 1).
If reusing the cam timing oil control solenoid assembly RH (for Intake Side of Bank 1), be sure to inspect the cam timing oil control solenoid O-ring RH (for Intake Side of Bank 1).
Install the cam timing oil control solenoid assembly RH (for Intake Side of Bank 1) to the timing chain or belt cover sub-assembly with the 2 new bolts.
If the cam timing oil control solenoid assembly RH (for Intake Side of Bank 1) has been struck or dropped, replace it.
Make sure that the O-ring is not cracked or moved out of place when installing the cam timing oil control solenoid assembly RH (for Intake Side of Bank 1).
Connect the cam timing oil control solenoid assembly RH (for Intake Side of Bank 1) connector.
5.INSPECT FOR ENGINE OIL LEAK
6.INSTALL BRACKET
17304A 7.INSTALL AIR TUBE SUB-ASSEMBLY RH