| *A | w/ Front Camera | *B | w/o Front Camera |
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
87834 1.REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/o Front Camera)
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
87810 4.REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/o Front Camera)
|
Remove in this Direction | - | - |
Disconnect the connector.
Using a T20 "TORX" socket wrench, remove the screw.
Remove the inner rear view mirror assembly as shown in the illustration.
87810 5.REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/ Front Camera)
|
Remove in this Direction | - | - |
Disconnect the connector.
Detach the claw.
Using a T20 "TORX" socket wrench, remove the screw.
Remove the inner rear view mirror assembly as shown in the illustration.