The air conditioning harness assembly connects the air conditioning amplifier assembly and the No. 4 air conditioning radiator damper servo sub-assembly. The air conditioning amplifier assembly supplies power and sends operation instructions to the No. 4 air conditioning radiator damper servo sub-assembly through the air conditioning harness assembly. The No. 4 air conditioning radiator damper servo sub-assembly sends pulse signals to inform the air conditioning amplifier assembly of the damper position.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Memory | DTC Output from | Priority |
|---|---|---|---|---|---|---|
| B145A87 | Lost Communication with Front Right Air Mix Damper Control Servo Motor LIN Missing Message | Diagnosis Condition: Ignition switch ON Malfunction Status: Error or lost communication with No. 4 air conditioning radiator damper servo sub-assembly Detection Time: Continuously for 10 seconds or more |
No. 4 air conditioning radiator damper servo sub-assembly | Memorized | Air Conditioner | B |
| Vehicle Condition | |||
|---|---|---|---|
| Pattern 1 | Pattern 2 | ||
| Diagnosis Condition | Ignition switch ON | ○ | ○ |
| Malfunction Status | Error communication with No. 4 air conditioning radiator damper servo sub-assembly | ○ | - |
| Lost communication with No. 4 air conditioning radiator damper servo sub-assembly | - | ○ | |
| Detection Time | Continuously for 10 seconds or more | Continuously for 10 seconds or more | |
| Trip Count | 1 trip | 1 trip | |
If the conditions of either of these patterns are detected, a DTC will be stored.
Check for DTCs.
| Result | Proceed to |
|---|---|
| Only B145A87 is output | A |
| DTC of air conditioning system in the table below is output | B |
| System | Relevant DTC | |
|---|---|---|
| Air conditioning system | B142A88 | Servo Motor LIN Communication Bus off |
A
B