| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY | 55606 | ( ) |
- | - |
| 2 | STOP LIGHT SWITCH ASSEMBLY | 84340 | - | - | - |
| 3 | STOP LIGHT SWITCH MOUNTING ADJUSTER | 84345 | ( ) |
- | - |
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
84340 2.REMOVE STOP LIGHT SWITCH ASSEMBLY
| *A | for LHD | *B | for RHD |
|
Remove in this Direction | - | - |
84345 3.REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER
| *A | for LHD | *B | for RHD |
|
Protective Tape | - | - |
Using a screwdriver, detach the claw to remove the stop light switch mounting adjuster.