| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | FRONT BUMPER ASSEMBLY | - | - | - | - |
| 2 | RADIATOR SHUTTER ASSEMBLY | 53180E | - | - | - |
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed, installed or replaced during the radiator shutter assembly removal/installation are shown below.
1.REMOVE FRONT BUMPER ASSEMBLY
53180E 2.REMOVE RADIATOR SHUTTER ASSEMBLY
|
Remove in this Direction | - | - |