| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | FRONT BUMPER ASSEMBLY | - | - | - | - |
| 2 | NO. 1 RADIATOR AIR GUIDE LH | 16595B | - | - | - |
| 3 | NO. 1 RADIATOR AIR GUIDE RH | 16593B | - | - | - |
| 4 | WINCH ASSEMBLY WITH BRACKET | - | ( ) |
- | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 5 | FRONT BUMPER EXTENSION LH | 52113D | - | - | - |
| 6 | FRONT BUMPER EXTENSION RH | 52112D | - | - | - |
| 7 | FRONT BUMPER LOWER RETAINER SUB-ASSEMBLY | 52072 | - | - | - |
| *1 | WINCH ASSEMBLY | - | - |
1.REMOVE FRONT BUMPER ASSEMBLY
16595B 2.REMOVE NO. 1 RADIATOR AIR GUIDE LH
|
Clip A |
|
Clip B |
16593B 3.REMOVE NO. 1 RADIATOR AIR GUIDE RH
Use the same procedure described for the LH side.
4.REMOVE WINCH ASSEMBLY WITH BRACKET
|
Move in this Direction |
|
Bolt |
|
Nut |
|
Connector |
Move the cover in the direction indicated by the arrow shown in the illustration.
Disconnect the 2 connectors.
Remove the nut and disconnect the wire.
Remove the bolt.
Detach the claw and clamp and disconnect the wire.
Remove the 8 bolts.
|
Remove in this Direction | - | - |
Using a crane or equivalent, remove the winch assembly with bracket.
Be careful as the winch assembly with bracket is very heavy.
Be sure to perform the operation with 2 or more people.
52113D 5.REMOVE FRONT BUMPER EXTENSION LH
52112D 6.REMOVE FRONT BUMPER EXTENSION RH
Use the same procedure described for the LH side.
52072 7.REMOVE FRONT BUMPER LOWER RETAINER SUB-ASSEMBLY