Home › ADAS / AD › ADVANCED DRIVER ASSISTANCE SYSTEM › CAMERA HEATER
RM38G0E _95 ADAS / AD _100650 ADVANCED DRIVER ASSISTANCE SYSTEM _0468120 CAMERA HEATER A

ADVANCED DRIVER ASSISTANCE SYSTEM  CAMERA HEATER  REMOVAL  


CAUTION / NOTICE / HINT

COMPONENTS (REMOVAL)
E457577N01
4.167,1.5 4.667,1.5 false 1.25,0.833 1.5,0.833 1.5,0.833 1.75,1.25 false 1.031,0.604 1.313,0.958 0.281,0.354 18 false 2 3.969,1.333 4.25,1.688 0.281,0.354 18 false 1

Procedure Part Name Code
Z101186

Z101188

Z101187

1 FORWARD RECOGNITION CAMERA 8646C - - -
2 FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY 86401 (Click here) - -

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 8646C 1.REMOVE FORWARD RECOGNITION CAMERA

Hide 86401 2.REMOVE FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY

Z101186

NOTICE:
E457578

·

Do not pull the harness forcibly when disconnecting the connector.

·

Do not touch the inner surface of the forward recognition with heater hood sub-assembly.

·

Do not apply force to the heating element of the forward recognition with heater hood sub-assembly or an open circuit may result.




a.
E457579C01
2.167,0.5 1.49,0.365 true 1.979,0.75 0.656,0.438 0.656,0.438 1.625,0.792 true 2.844,0.333 3.021,0.635 0.177,0.302 18 true i 2.49,0.573 2.677,0.854 0.188,0.281 18 true ii 0.708,0.573 0.948,0.865 0.24,0.292 18 true iii 0.396,0.344 0.646,0.5 0.25,0.156 10 true *b 1.313,0.292 1.563,0.448 0.25,0.156 10 true *a 6.219,0.646 6.458,0.938 0.24,0.292 18 true iv 6.688,1.042 6.927,1.333 0.24,0.292 18 true v
*a Connector Clamp *b Guide
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


i.

Disconnect the connector.

NOTICE:

When disconnecting the connector, do not forcibly pull the wire harness.



ii.

Detach the connector clamp.


iii.

Remove the wire harness from the guide.

NOTICE:

Do not pull the harness forcibly when removing the wire harness.



iv.

Pull the forward recognition with heater hood sub-assembly in the direction indicated by the arrow (1) shown in the illustration to detach the claw.


v.

Pull the forward recognition with heater hood sub-assembly in the direction indicated by the arrow (2) shown in the illustration to detach the guide and remove the forward recognition with heater hood sub-assembly.