| *1 | HEADLIGHT HOUSING LH | *2 | BASE B ASSEMBLY |
| ● | Non-reusable part | - | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 6 | HEADLIGHT GASKET | 81134 | - | - | - |
| 7 | HEADLIGHT ECU SUB-ASSEMBLY LH | 81056A | - | - | - |
| 8 | HEADLIGHT ASSEMBLY LH | - | - | - | - |
| *1 | HEADLIGHT ECU LH | - | - |
| ● | Non-reusable part | - | - |
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
85967D 1.INSTALL LIGHT CONTROL LED ECU LH
|
|
|
Install in this Direction | - | - |
|
Connector |
|
Screw |
Aetach the connector and install the light control LED ECU LH with the 2 screws.
Push the base b assembly in the direction shown in the illustration.
Connect the 3 connectors.
Attach the clamp and install the 3 screws.
81144 5.INSTALL NO. 1 HEADLIGHT COVER
81134 6.INSTALL HEADLIGHT GASKET
81056A 7.INSTALL HEADLIGHT ECU SUB-ASSEMBLY LH
8.INSTALL HEADLIGHT ASSEMBLY LH