| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | NO. 2 INSTRUMENT SIDE PANEL | 5138F | ( ) |
- | - |
| 2 | LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL | 55432D | ( ) |
- | - |
| 3 | AUTO HIGH BEAM SWITCH | 84153 | ( ) |
- | - |
Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
84153 3.REMOVE AUTO HIGH BEAM SWITCH
Using a thin-bladed screwdriver with its tip wrapped with protective tape, detach the claw and remove the auto high beam switch.