| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | FRONT SEAT BELT SET RH | 73203 | ( ) |
- | - |
| 2 | FRONT SEAT BELT SET LH | 73204A | ( ) |
- | - |
| 3 | FRONT SEAT ASSEMBLY LH | - | - | - | - |
| *A | for Driver Side | *B | for Front Passenger Side |
| *1 | FRONT SEAT BELT ANCHOR PLATE | - | - |
|
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) | - | - |
Wear protective gloves. Sharp areas on the parts may injure your hands.
There is risk of injury.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
Use the same procedure for the RH and LH sides.
The following procedure is for the LH side.
73203 1.INSTALL FRONT SEAT BELT SET RH (for Front Passenger Side)
|
Connector |
|
Nut |
|
Band |
|
Protruding Part |
Install the front seat belt anchor plate.
Attach the claw and clamp, and connect the connector.
Install the front seat belt set RH with the nut.
Do not allow the anchor part of the front seat belt set RH to overlap the protruding part.
Attach the band.
73204A 2.INSTALL FRONT SEAT BELT SET LH (for Driver Side)
| *A | w/ Memory | - | - |
|
Connector |
|
Nut |
|
Protruding Part | - | - |
Install the front seat belt anchor plate.
Attach the claw and clamp.
w/ Memory:
1. Connect the connector.
Install the front seat belt set LH with the nut.
Do not allow the anchor part of the front seat belt set LH to overlap the protruding part.
3.INSTALL FRONT SEAT ASSEMBLY LH