| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | REAR NO. 1 SEAT ASSEMBLY RH | - | ( ) |
- | - |
| 2 | REAR NO. 3 SEAT CUSHION HINGE COVER | 71692N | - | - | - |
| 3 | REAR NO. 1 SEAT CUSHION HINGE COVER | 71691W | - | - | - |
|
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) | - | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 4 | REAR CENTER NO. 1 SEAT HEADREST ASSEMBLY | 71960G | - | - | - |
| 5 | NO. 1 SEAT HEADREST ASSEMBLY RH | 71940F | - | - | - |
| 6 | INSPECT SEAT BELT WARNING SYSTEM | - | ( ) |
- | - |
| *A | w/ Seat Belt Warning System | - | - |
1.INSTALL REAR NO. 1 SEAT ASSEMBLY RH
Place the rear No. 1 seat assembly RH in the vehicle.
2 or more people are required when carrying the rear No. 1 seat assembly RH into the vehicle.
Be careful not to damage the vehicle body.
|
Bolt |
|
Connector |
Insert the 2 location pins of the rear No. 1 seat assembly RH through the 2 body holes and place the rear No. 1 seat assembly RH.
Tighten the 2 bolts in the order shown in the illustration.
Tighten the 2 bolts in the order shown in the illustration.
Connect the connector.
71692N 2.INSTALL REAR NO. 3 SEAT CUSHION HINGE COVER
71691W 3.INSTALL REAR NO. 1 SEAT CUSHION HINGE COVER
71960G 4.INSTALL REAR CENTER NO. 1 SEAT HEADREST ASSEMBLY
71940F 5.INSTALL NO. 1 SEAT HEADREST ASSEMBLY RH