| *A | w/ Tonneau Cover | *B | for RH Seat |
Wear protective gloves. Sharp areas on the parts may injure your hands.
There is risk of injury.
Use the same procedure for the RH and LH sides.
The following procedure is for the LH side.
64910M 1.REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
58410B 2.REMOVE DECK BOARD ASSEMBLY
58418H 4.REMOVE REAR FLOOR BOARD REAR LH
58417B 5.REMOVE REAR FLOOR BOARD REAR RH
Use the same procedure described for the LH side.
58574G 8.REMOVE REAR FLOOR MAT REAR SUPPORT PLATE
58459B 9.REMOVE NO. 3 DECK FLOOR BRACKET LH
58458J 10.REMOVE NO. 3 DECK FLOOR BRACKET RH
Use the same procedure described for the LH side.
11.REMOVE REAR NO. 2 SEAT ASSEMBLY LH
|
Bolt |
|
Clip |
Remove the 2 bolts and 2 clips.
| *A | w/ Seat Belt Warning System | - | - |
|
Remove in this Direction |
|
Connector |
|
Bolt | - | - |
Disconnect the connector.
w/ Seat Belt Warning System:
1. Disconnect the connector.
Remove the 2 bolts.
Pull out the 2 location pins of the rear No. 2 seat assembly LH.
Remove and carry the rear No. 2 seat assembly LH out of the vehicle.
Protect the rear No. 2 seat legs.
Carrying the rear No. 2 seat assembly LH from the vehicle must be performed by multiple people.
Do not damage the rear No. 2 seat assembly LH, body exterior or interior parts.