| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | NO. 2 INSTRUMENT SIDE PANEL | 55318F | ( ) |
- | - |
| 2 | LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL | 55432D | ( ) |
- | - |
| 3 | PARKING SUPPORT BRAKE CANCEL SWITCH | 84491 | ( ) |
- | - |
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
84491 3.REMOVE PARKING SUPPORT BRAKE CANCEL SWITCH
| *A | for LHD | *B | for RHD |
|
Remove in this Direction | - | - |
Using a thin-bladed screwdriver, detach the claw and remove the panoramic view monitor switch as shown in the illustration.
Tape the thin-bladed screwdriver tip before use.