If the ECM cannot recognize the forward recognition camera, DTC U040181 is stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority |
|---|---|---|---|---|---|
| U040181 | Invalid Data Received from ECM/PCM "A" Invalid Serial Data Received | When the ignition switch is turned to ON for 17 seconds or more, the ECM cannot recognize the forward recognition camera continues for 2 second or more. | ECM | Radar Cruise2 | A |
Before replacing the ECM, refer to Service Bulletin.
Pre-procedure1
Clear the DTCs.
Make sure that the DTC detection conditions are met.
If the detection conditions are not met, the system cannot detect the malfunction.
Procedure1
Check for DTCs.
| Result | Proceed to |
|---|---|
| DTC U040181 is not output | A |
| DTC U040181 is output | B |
Post-procedure1
None
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B
for 1GR-FE: Click hereEngine / Hybrid System>1GR-FE (ENGINE CONTROL)>ECM>REMOVAL
for V35A-FTS: Click hereEngine / Hybrid System>V35A-FTS (ENGINE CONTROL)>ECM>REMOVAL