Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM
RM38G0E _54 Brake _100463 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0469467 ELECTRONICALLY CONTROLLED BRAKE SYSTEM C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM  C121F49  Lost Communication with Electronic Brake Booster Control Module "A" Internal Electronic Failure  C14F112  Brake Pressure Control Solenoid "C" Control Circuit Short to Battery  C14F114  Brake Pressure Control Solenoid "C" Control Circuit Short to Ground or Open  C14F118  Brake Pressure Control Solenoid "C" Control Circuit Current Below Threshold  C14F119  Brake Pressure Control Solenoid "C" Control Circuit Current Above Threshold  C14F11D  Brake Pressure Control Solenoid "C" Control Circuit Current Out of Range  C14FA12  Brake Pressure Control Solenoid "D" Control Circuit Short to Battery  C14FA14  Brake Pressure Control Solenoid "D" Control Circuit Short to Ground or Open  C14FA18  Brake Pressure Control Solenoid "D" Control Circuit Current Below Threshold  C14FA19  Brake Pressure Control Solenoid "D" Control Circuit Current Above Threshold  C14FA1D  Brake Pressure Control Solenoid "D" Control Circuit Current Out of Range  C150712  Brake Pressure Control solenoid "E" Control Circuit Short to Battery  C150714  Brake Pressure Control solenoid "E" Control Circuit Short to Ground or Open  C150718  Brake Pressure Control solenoid "E" Control Circuit Current Below Threshold  C150719  Brake Pressure Control solenoid "E" Control Circuit Current Above Threshold  C15071D  Brake Pressure Control solenoid "E" Control Circuit Current Out of Range  C150D12  Brake Pressure Control solenoid "F" Control Circuit Short to Battery  C150D14  Brake Pressure Control solenoid "F" Control Circuit Short to Ground or Open  C150D18  Brake Pressure Control solenoid "F" Control Circuit Current Below Threshold  C150D19  Brake Pressure Control solenoid "F" Control Circuit Current Above Threshold  C150D1D  Brake Pressure Control solenoid "F" Control Circuit Current Out of Range  


DESCRIPTION

The linear solenoids SLA and SLR control the regulator based on signals from the No. 1 skid control ECU (brake booster with master cylinder assembly) and produce servo pressure in accordance with the vehicle condition.

When the system is normal, the switching solenoid SGH is opened to allow brake fluid to flow to the stroke simulator when the brake pedal is depressed. When the system is abnormal, the switching solenoid SGH closes to prevent the flow of brake fluid.

When the system is normal, the switching solenoid SSA is closed. When the system is abnormal, the switching solenoid SSA is opened to allow fluid to flow to the brake fluid level warning switch (brake booster with master cylinder assembly).

HINT:
·

If the supply voltage decreases, a drop in current may cause DTCs to be stored.

·

Brake pressure control solenoid "C": Solenoid SLA.

·

Brake pressure control solenoid "D": Solenoid SLR.

·

Brake pressure control solenoid "E": Solenoid SSA.

·

Brake pressure control solenoid "F": Solenoid SGH.



DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Note
C121F49 Lost Communication with Electronic Brake Booster Control Module "A" Internal Electronic Failure When the voltage at terminal +BI1 is between 7.3 V and 16.6 V, the voltage of the booster circuit inside the ECU is excessively low for 0.1 seconds or more. Brake booster with master cylinder assembly Brake Booster Output ECU: No. 1 skid control ECU (brake booster with master cylinder assembly)
C14F112 Brake Pressure Control Solenoid "C" Control Circuit Short to Battery An excessive current is detected in the solenoid for 0.05 seconds or more.
·

Supply voltage reduced

·

Brake booster with master cylinder assembly


Brake Booster Output ECU: No. 1 skid control ECU (brake booster with master cylinder assembly)
C14F114 Brake Pressure Control Solenoid "C" Control Circuit Short to Ground or Open Insufficient current is detected in the solenoid for 0.05 seconds or more. Brake booster with master cylinder assembly Brake Booster Output ECU: No. 1 skid control ECU (brake booster with master cylinder assembly)
C14F118 Brake Pressure Control Solenoid "C" Control Circuit Current Below Threshold An open is detected in the solenoid for 0.05 seconds or more. Brake booster with master cylinder assembly Brake Booster Output ECU: No. 1 skid control ECU (brake booster with master cylinder assembly)
C14F119 Brake Pressure Control Solenoid "C" Control Circuit Current Above Threshold Overcurrent is detected in the solenoid for 0.05 seconds or more. Brake booster with master cylinder assembly Brake Booster Output ECU: No. 1 skid control ECU (brake booster with master cylinder assembly)
C14F11D Brake Pressure Control Solenoid "C" Control Circuit Current Out of Range Current leakage is detected in the solenoid for 0.05 seconds or more. Brake booster with master cylinder assembly Brake Booster Output ECU: No. 1 skid control ECU (brake booster with master cylinder assembly)
C14FA12 Brake Pressure Control Solenoid "D" Control Circuit Short to Battery An excessive current is detected in the solenoid for 0.05 seconds or more.
·

Supply voltage reduced

·

Brake booster with master cylinder assembly


Brake Booster Output ECU: No. 1 skid control ECU (brake booster with master cylinder assembly)
C14FA14 Brake Pressure Control Solenoid "D" Control Circuit Short to Ground or Open Insufficient current is detected in the solenoid for 0.05 seconds or more. Brake booster with master cylinder assembly Brake Booster Output ECU: No. 1 skid control ECU (brake booster with master cylinder assembly)
C14FA18 Brake Pressure Control Solenoid "D" Control Circuit Current Below Threshold An open is detected in the solenoid for 0.05 seconds or more. Brake booster with master cylinder assembly Brake Booster Output ECU: No. 1 skid control ECU (brake booster with master cylinder assembly)
C14FA19 Brake Pressure Control Solenoid "D" Control Circuit Current Above Threshold Overcurrent is detected in the solenoid for 0.05 seconds or more. Brake booster with master cylinder assembly Brake Booster Output ECU: No. 1 skid control ECU (brake booster with master cylinder assembly)
C14FA1D Brake Pressure Control Solenoid "D" Control Circuit Current Out of Range Current leakage is detected in the solenoid for 0.05 seconds or more. Brake booster with master cylinder assembly Brake Booster Output ECU: No. 1 skid control ECU (brake booster with master cylinder assembly)
C150712 Brake Pressure Control solenoid "E" Control Circuit Short to Battery Monitoring value of SSA continues to be excessively higher than request value.
·

Supply voltage reduced

·

Brake booster with master cylinder assembly


Brake Booster Output ECU: No. 1 skid control ECU (brake booster with master cylinder assembly)
C150714 Brake Pressure Control solenoid "E" Control Circuit Short to Ground or Open Monitoring value of SSA continues to be excessively lower than request value. Brake booster with master cylinder assembly Brake Booster Output ECU: No. 1 skid control ECU (brake booster with master cylinder assembly)
C150718 Brake Pressure Control solenoid "E" Control Circuit Current Below Threshold An open is detected in SSA for 0.05 seconds or more. Brake booster with master cylinder assembly Brake Booster Output ECU: No. 1 skid control ECU (brake booster with master cylinder assembly)
C150719 Brake Pressure Control solenoid "E" Control Circuit Current Above Threshold Overcurrent is detected in SSA for 0.05 seconds or more. Brake booster with master cylinder assembly Brake Booster Output ECU: No. 1 skid control ECU (brake booster with master cylinder assembly)
C15071D Brake Pressure Control solenoid "E" Control Circuit Current Out of Range Current leakage is detected in SSA for 0.05 seconds or more. Brake booster with master cylinder assembly Brake Booster Output ECU: No. 1 skid control ECU (brake booster with master cylinder assembly)
C150D12 Brake Pressure Control solenoid "F" Control Circuit Short to Battery Monitoring value of SGH continues to be excessively higher than request value.
·

Supply voltage reduced

·

Brake booster with master cylinder assembly


Brake Booster Output ECU: No. 1 skid control ECU (brake booster with master cylinder assembly)
C150D14 Brake Pressure Control solenoid "F" Control Circuit Short to Ground or Open Monitoring value of SGH continues to be excessively lower than request value. Brake booster with master cylinder assembly Brake Booster Output ECU: No. 1 skid control ECU (brake booster with master cylinder assembly)
C150D18 Brake Pressure Control solenoid "F" Control Circuit Current Below Threshold An open is detected in SGH for 0.05 seconds or more. Brake booster with master cylinder assembly Brake Booster Output ECU: No. 1 skid control ECU (brake booster with master cylinder assembly)
C150D19 Brake Pressure Control solenoid "F" Control Circuit Current Above Threshold Overcurrent is detected in SGH for 0.05 seconds or more. Brake booster with master cylinder assembly Brake Booster Output ECU: No. 1 skid control ECU (brake booster with master cylinder assembly)
C150D1D Brake Pressure Control solenoid "F" Control Circuit Current Out of Range Current leakage is detected in SGH for 0.05 seconds or more. Brake booster with master cylinder assembly Brake Booster Output ECU: No. 1 skid control ECU (brake booster with master cylinder assembly)

CAUTION / NOTICE / HINT

NOTICE:

After replacing the No. 1 skid control ECU (brake booster with master cylinder assembly), perform "Calibration".

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM>UTILITY


PROCEDURE

1.CHECK DTC
a.

Check the DTCs that are output.

Chassis > Brake Booster > Trouble Codes
50001 466
Chassis > Brake/EPB > Trouble Codes
50001 435
HINT:

If a DTC for undervoltage is output, first troubleshoot the power source system.



Result:
Result Proceed to
DTCs C121F49, C14F112, C14F114, C14F118, C14F119, C14F11D, C14FA12, C14FA14, C14FA18, C14FA19, C14FA1D, C150712, C150714, C150718, C150719, C15071D, C150D12, C150D14, C150D18, C150D19 and C150D1D are not output. A
A DTC related to low voltage is output. B
DTCs C121F49, C14F112, C14F114, C14F118, C14F119, C14F11D, C14FA12, C14FA14, C14FA18, C14FA19, C14FA1D, C150712, C150714, C150718, C150719, C15071D, C150D12, C150D14, C150D18, C150D19 and/or C150D1D are output. C



A

B

REPAIR CIRCUITS INDICATED BY OUTPUT DTCS

C

REPLACE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY