Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE BOOSTER (for RHD) › 2021.04–2021.07
RM38G0E _54 Brake _100464 BRAKE SYSTEM (OTHER) _0467268 BRAKE BOOSTER(for RHD) A

BRAKE SYSTEM (OTHER)  BRAKE BOOSTER(for RHD)  REMOVAL  


CAUTION / NOTICE / HINT

COMPONENTS (REMOVAL)
C457231N03
6.594,0.208 6.844,0.208 false 6.604,0.583 6.854,0.583 false 1.948,0.729 2.49,0.396 2.49,0.396 2.656,0.396 false 6.094,0.031 6.646,0.438 0.552,0.406 18 false 1, 3 6.354,0.417 6.76,0.865 0.406,0.448 18 false 4 2.74,0.25 3.146,0.698 0.406,0.448 18 false 2

Procedure Part Name Code
Z101186

Z101188

Z101187

1 PRECAUTION - (Click here) - -
2 ENGINE SIDE COVER RH 51473C - - -
3 PERFORM ACCUMULATOR PRESSURE ZERO DOWN - (Click here) - -
4 DRAIN BRAKE FLUID - - (Click here) -

C457232N02
4.021,1 4.594,1.51 4.594,1.51 4.76,1.51 false 4.823,1.354 5.104,1.708 0.281,0.354 18 false 5

Procedure Part Name Code
Z101186

Z101188

Z101187

5 LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY 73900 - - -

C452213N01
1,4.271 1.167,4.271 1.167,4.271 1.5,3.688 false 5.51,1.063 5.958,1.531 5.958,1.531 6.125,1.531 false 0.76,4.104 1.042,4.458 0.281,0.354 18 false 6 6.219,1.375 6.5,1.729 0.281,0.354 18 false 7

Procedure Part Name Code
Z101186

Z101188

Z101187

6 BRAKE PEDAL RETURN SPRING 47101A - - -
7 STOP LIGHT SWITCH ASSEMBLY 84340 - - -

C457155N05
6.604,1.188 6.771,0.854 6.771,0.854 6.854,0.854 false 2.542,0.885 2.99,0.354 2.99,0.354 3.24,0.354 false 0.802,1.51 0.635,1.51 0.635,1.51 0.385,2.375 false 3.198,2.458 3.052,1.833 3.052,1.833 2.885,1.833 false 5.719,0.74 5.469,0.406 5.469,0.406 5.302,0.406 false 4.313,2.49 4.573,1.802 4.573,1.802 4.74,1.802 false 3.719,2.385 3.906,1.75 3.906,1.75 3.99,1.75 false 4.771,2.875 4.906,3.406 4.906,3.406 5.073,3.406 false 4.24,2.75 4.375,3.333 4.375,3.333 4.458,3.333 false 3.99,4.083 4.323,4.354 4.323,4.354 4.406,4.354 false 3.219,5.146 3.125,5.458 3.125,5.458 2.542,5.458 true 2.958,5.458 3.031,5.24 false 2.125,5.302 2.458,5.635 0.333,0.333 18 false 10 4.885,4.229 5.302,4.563 0.417,0.333 18 false 11 6.104,3.844 6.438,4.094 0.333,0.25 10 false x 4 5.25,3.26 5.667,3.594 0.417,0.333 18 false 13 2.542,1.698 2.958,2.031 0.417,0.333 18 false 16 6.896,0.719 7.125,1.125 0.229,0.406 18 false 8 2.417,1.771 2.667,2.021 0.25,0.25 10 false ● 3.552,0.229 3.969,0.563 0.417,0.333 18 false 9 5.104,0.344 5.354,0.594 0.25,0.25 10 false ● 1.083,1.375 1.5,1.708 0.417,0.333 18 false 12 5.125,3.333 5.375,3.583 0.25,0.25 10 false ● 4.01,1.615 4.427,1.948 0.417,0.333 18 false 15 4.469,3.198 4.885,3.531 0.417,0.333 18 false 14 4.76,4.302 5.01,4.552 0.25,0.25 10 false ● 4.76,1.667 5.177,2 0.417,0.333 18 false 14

Procedure Part Name Code
Z101186

Z101188

Z101187

8 PUSH ROD PIN 47264A - - -
9 ENGINE ROOM MAIN WIRE 82111 (Click here) - -
10 BRAKE TUBE - (Click here) - -
11 NO. 2 BRAKE TUBE CLAMP 47372 (Click here) - -
12 BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY 47210L (Click here) - -
13 BRAKE MASTER CYLINDER GASKET 44785D - - -
14 BOOSTER BRACKET STOPPER RING - - - -
15 BRAKE BOOSTER BRACKET - - - -
16 BRAKE MASTER CYLINDER GASKET 44785D - - -

● Non-reusable part
V100135

Lithium soap base glycol grease

C452226N05
1.552,4.104 1.719,4.104 1.719,4.104 1.833,3.917 false 2.74,4.531 2.906,4.531 2.906,4.531 3.01,4.344 false 4.917,0.948 5.25,0.948 false 1.219,3.969 1.635,4.302 0.417,0.333 18 false 17 2.406,4.385 2.823,4.719 0.417,0.333 18 false 18 5.542,0.823 5.958,1.156 0.417,0.333 18 false 19

Procedure Part Name Code
Z101186

Z101188

Z101187

17 NO. 1 RESERVOIR HOSE - (Click here) - -
18 NO. 2 RESERVOIR HOSE - (Click here) - -
19 NO. 1 WIRE CLAMP BRACKET - (Click here) - -

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during brake booster with master cylinder assembly removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedures Necessary procedures Effect/Inoperative Function when Necessary Procedures are not Performed Link
No. 1 Skid control ECU (brake booster with master cylinder assembly) Update ECU security key Vehicle control history (RoB) are stored (Click here)
1.

Bleed air

2.

Perform "Calibration"


·

DTCs are stored

·

ABS warning light illuminates

·

Brake system warning light (yellow indicator) illuminates

·

Slip indicator light illuminates

·

Electronically controlled brake system disabled or malfunctions


(Click here)
Disconnect cable from negative (-) battery terminal Memorize steering angle neutral point Parking assist monitor system (Click here)
Multi-terrain monitor system (Click here)
Panoramic view monitor system (Click here)

HINT:
·

When the cable is disconnected/reconnected to the battery terminal, systems temporarily stop operating. However, each system has a function that completes learning the first time the system is used.

-

Learning completes when vehicle is driven

Effect/Inoperative Function When Necessary Procedures are not Performed Necessary Procedures Link
Stop and start system Drive the vehicle until stop and start control is permitted (approximately 5 to 60 minutes) (Click here)
Lighting system (EXT) Cornering lights Drive the vehicle straight ahead at 35 km/h (22 mph) or more for 5 seconds or more. (Click here)
Pre-collision system
Lane tracing assist system
Lane departure alert system
Adaptive high beam system

-

Learning completes when vehicle is operated normally

Effect/Inoperative Function When Necessary Procedures are not Performed Necessary Procedures Link
Power back door system Fully close the back door by hand.
HINT:

Initialization is not necessary if the above procedures are performed while the back door is closed.


(Click here)
Air conditioning system After the ignition switch is turned to ON, the servo motor and expansion valve standard position is recognized. -




CAUTION / NOTICE / HINT

NOTICE:
·

While the battery is connected, even if the ignition switch is off, the brake control system activates when the brake pedal is depressed or any door courtesy switch turns on. Therefore, when servicing the brake system components, do not operate the brake pedal or open/close the doors while the battery is connected.

·
C452240C06
2.25,0.667 2.25,0.417 2.25,0.417 2.5,0.417 false 2.354,1.74 2.521,1.74 false 2.188,1.5 2.604,1.417 2.604,1.417 2.854,1.417 true 0.719,0.521 0.969,0.521 false 0.771,1.448 1.104,1.448 false 0.729,1.01 1.063,1.01 false 1.854,0.917 2.021,0.167 2.021,0.167 2.188,0.167 true 0.938,1.833 1.271,1.833 false 2.542,0.354 2.792,0.521 0.25,0.167 10 false *a 0.521,0.927 0.771,1.094 0.25,0.167 10 false *b 2.573,1.656 2.823,1.906 0.25,0.25 10 false *c 2.896,1.375 3.229,1.708 0.333,0.333 10 false *d 0.49,0.427 0.74,0.677 0.25,0.25 10 false *e 0.583,1.354 0.917,1.604 0.333,0.25 10 false *f 2.25,0.073 2.5,0.323 0.25,0.25 10 false *g 0.74,1.771 1.073,2.021 0.333,0.25 10 false *h
*a No. 1 Skid Control ECU
*b No. 1 Reservoir Hose and No. 2 Reservoir Hose
*c Master Cylinder Push Rod Clevis
*d Boot
*e Brake Master Cylinder Reservoir
*f No. 1 Brake Actuator Tube
*g No. 1 Wire Clamp Bracket
*h Brake Booster Pump with Accumulator Assembly


Do not carry the brake booster with master cylinder assembly by the parts shown in the illustration.



PROCEDURE

Hide 1. PRECAUTION

Z101186

CAUTION:
C376913

Be sure to read precaution thoroughly before servicing.

Click here(Click here)


NOTICE:

After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) battery terminal.

Click here(Click here)



Hide 51473C 2.REMOVE ENGINE SIDE COVER RH

Hide 3.PERFORM ACCUMULATOR PRESSURE ZERO DOWN

Z101186

Click here(Click here)

Hide 4.DRAIN BRAKE FLUID

Z101186

NOTICE:

If brake fluid leaks onto any painted surface, immediately wash it off.



Hide 73900 5.REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

Hide 47101A 6.REMOVE BRAKE PEDAL RETURN SPRING

a.
C455268


Hide 84340 7.REMOVE STOP LIGHT SWITCH ASSEMBLY

Hide 47264A 8.REMOVE PUSH ROD PIN

a.
C455272


Hide 82111 9.DISCONNECT ENGINE ROOM MAIN WIRE

a.
C457156C03
4.385,1.458 4.531,1.74 0.146,0.281 18 true i 4.052,0.854 4.219,1.146 0.167,0.292 18 true ii 3.885,0.094 4.146,0.375 0.26,0.281 18 true iii
V113147

Release the lock lever
V113148

Disconnect the connector


i.

Disconnect the brake fluid level warning switch connector.

NOTICE:

Be careful not to allow any brake fluid to enter the connector.



ii.

Disengage the clamp to disconnect the engine room main wire from the brake booster with master cylinder assembly.


iii.

Release the lock lever and disconnect the connector from the brake booster with master cylinder assembly.

NOTICE:

Be careful not to allow any brake fluid to enter the connector.




Hide 10.REMOVE BRAKE TUBE

a.
C457157N01
0.396,0.104 0.677,0.458 0.281,0.354 18 false i 0.396,2.125 0.677,2.479 0.281,0.354 18 false ii

i.

Using a union nut wrench, remove the 2 tubes from the brake actuator assembly and brake booster with master cylinder assembly..

NOTICE:
·

Do not kink or damage the brake tubes.

·

Do not allow any foreign matter such as dirt or dust to enter the brake tubes from the connecting parts.




ii.

Disengage the 2 clamps and remove the 2 brake tubes from the No. 2 brake tube clamp.

NOTICE:

Do not kink or damage the brake tubes.




Hide 47372 11.REMOVE NO. 2 BRAKE TUBE CLAMP

Z101186

(Click here)

Hide 47210L 12.REMOVE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY

a.
C457185N03
0.083,0.063 0.604,0.594 0.521,0.531 18 false i, ii 3.719,0.083 3.958,0.563 0.24,0.479 18 false iii

i.

Disconnect the connector.


ii.

Remove the nut and siren.


iii.

Remove the 4 nuts and brake booster with master cylinder assembly.

NOTICE:
·

Do not apply excessive force to the brake lines.

·

Be careful not to allow any brake fluid to enter the connector.

·
C452240C07
2.25,0.667 2.25,0.417 2.25,0.417 2.5,0.417 false 2.354,1.74 2.521,1.74 false 2.188,1.5 2.604,1.417 2.604,1.417 2.854,1.417 true 0.719,0.521 0.969,0.521 false 0.771,1.448 1.104,1.448 false 0.729,1.01 1.063,1.01 false 1.854,0.917 2.021,0.167 2.021,0.167 2.188,0.167 true 0.938,1.833 1.271,1.833 false 2.542,0.354 2.792,0.521 0.25,0.167 10 false *a 0.521,0.927 0.771,1.094 0.25,0.167 10 false *b 2.573,1.656 2.823,1.906 0.25,0.25 10 false *c 2.896,1.375 3.229,1.708 0.333,0.333 10 false *d 0.49,0.427 0.74,0.677 0.25,0.25 10 false *e 0.583,1.354 0.917,1.604 0.333,0.25 10 false *f 2.25,0.073 2.5,0.323 0.25,0.25 10 false *g 0.74,1.771 1.073,2.021 0.333,0.25 10 false *h
*a No. 1 Skid Control ECU
*b No. 1 Reservoir Hose and No. 2 Reservoir Hose
*c Master Cylinder Push Rod Clevis
*d Boot
*e Brake Master Cylinder Reservoir
*f No. 1 Brake Actuator Tube
*g No. 1 Wire Clamp Bracket
*h Brake Booster Pump with Accumulator Assembly


Do not carry the brake booster with master cylinder assembly by the parts shown in the illustration.





Hide 44785D 13.REMOVE BRAKE MASTER CYLINDER GASKET

a.
C452232


Hide 14.REMOVE BOOSTER BRACKET STOPPER RING

a.
C452234


Hide 15.REMOVE BRAKE BOOSTER BRACKET

a.
C452236


Hide 44785D 16.REMOVE BRAKE MASTER CYLINDER GASKET

a.
C452238


Hide 17.REMOVE NO. 1 RESERVOIR HOSE

Z101186

HINT:

Perform this procedure only when replacement of the No. 1 reservoir hose is necessary.



a.
C452242


Hide 18.REMOVE NO. 2 RESERVOIR HOSE

Z101186

HINT:

Perform this procedure only when replacement of the No. 2 reservoir hose is necessary.



a.
C452244


Hide 19.REMOVE NO. 1 WIRE CLAMP BRACKET

Z101186

HINT:

Perform this procedure only when replacement of the No. 1 wire clamp bracket is necessary.



a.
C452248N01
0.427,0.125 1.177,0.458 0.75,0.333 18 false i

i.

Using a 5 mm long hexagon socket wrench, remove the bolt and No. 1 wire clamp bracket.