Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › BLIND SPOT MONITOR SYSTEM
RM38G0E _56 Audio / Visual / Telematics _100728 PARK ASSIST / MONITORING _0469674 BLIND SPOT MONITOR SYSTEM C

PARK ASSIST / MONITORING  BLIND SPOT MONITOR SYSTEM  U032251  Software Incompatibility with Body Control Module Not Programmed  U032257  Software Incompatibility with Body Control Module Invalid/Incompatible Software Component  


DESCRIPTION

This DTC is stored when the destination information of the main body ECU (multiplex network body ECU) does not match that of the blind spot monitor sensors.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
U032251 Software Incompatibility with Body Control Module Not Programmed Destination information of the main body ECU and blind spot monitor sensor do not match
·

Main body ECU (multiplex network body ECU)

·

Blind spot monitor sensor LH (B)


Blind Spot Monitor "B" A
U032257 Software Incompatibility with Body Control Module Invalid/Incompatible Software Component Destination information of the main body ECU and blind spot monitor sensor do not match
·

Main body ECU (multiplex network body ECU)

·

Blind spot monitor sensor LH (B)


Blind Spot Monitor "B" A

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
U032251 Software Incompatibility with Body Control Module Not Programmed Destination information of the main body ECU and blind spot monitor sensor do not match
·

Main body ECU (multiplex network body ECU)

·

Blind spot monitor sensor RH (A)


Blind Spot Monitor "A" A
U032257 Software Incompatibility with Body Control Module Invalid/Incompatible Software Component Destination information of the main body ECU and blind spot monitor sensor do not match
·

Main body ECU (multiplex network body ECU)

·

Blind spot monitor sensor RH (A)


Blind Spot Monitor "A" A

CAUTION / NOTICE / HINT

NOTICE:
·

When checking for DTCs, make sure that the blind spot monitor system is turned on.

·

Before replacing the main body ECU (multiplex network body ECU), refer to the Service Bulletin.



PROCEDURE

1.CONFIRM PART NUMBER (MAIN BODY ECU [MULTIPLEX NETWORK BODY ECU])
a.

Check the main body ECU (multiplex network body ECU) part number.

i.

Check if the part number of the main body ECU (multiplex network body ECU) installed to the vehicle is correct.

OK:

The part number is correct.




Result:
Proceed to
OK
NG



OK

2.CLEAR DTC

NG

2.CLEAR DTC
a.

Clear the DTCs.

Body Electrical > Blind Spot Monitor "B" > Clear DTCs
50002 460

Result:
Proceed to
NEXT



NEXT

3.CHECK FOR DTC
3.CHECK FOR DTC
a.

Check for DTCs.

Body Electrical > Blind Spot Monitor "B" > Trouble Codes
50001 460

Result:
Result Proceed to
No DTCs are output. A
U032251 or U032257 is output B



A

4.CLEAR DTC

B

4.CLEAR DTC
a.

Clear the DTCs.

Body Electrical > Blind Spot Monitor "A" > Clear DTCs
50002 461

Result:
Proceed to
NEXT



NEXT

5.CHECK FOR DTC
5.CHECK FOR DTC
a.

Check for DTCs.

Body Electrical > Blind Spot Monitor "A" > Trouble Codes
50001 461

Result:
Result Proceed to
No DTCs are output. A
U032251 or U032257 is output B



A

B