Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM › 2021.04–2021.07
RM38G0E _51 Engine / Hybrid System _101082 CRUISE CONTROL _0469134 CRUISE CONTROL SYSTEM C

CRUISE CONTROL  CRUISE CONTROL SYSTEM  U042381  Invalid Data Received from Instrument Panel Cluster Control Module Invalid Serial Data Received  


DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
U042381 Invalid Data Received from Instrument Panel Cluster Control Module Invalid Serial Data Received After approximately 2 seconds have elapsed since turning the ignition switch to ON and with the cruise control system on, the ECM received invalid data from the combination meter assembly for approximately 5 seconds or more.
·

Meter/gauge system

·

ECM


Cruise Control B

CAUTION / NOTICE / HINT

NOTICE:

Before replacing the ECM, refer to Service Bulletin.


PROCEDURE

1.CHECK FOR DTCs (METER / GAUGE SYSTEM)
a.

Check for DTCs.

HINT:

If DTC U042381 is output by the cruise control system, perform troubleshooting for the meter/gauge system.


Body Electrical > Combination Meter > Trouble Codes
50001 409

Result:
Result Proceed to
Meter/gauge system DTCs are not output A
Meter/gauge system DTCs are output B



A

B