| *1 | O-RING | *2 | FUEL PUMP SPACER |
| *3 | FUEL PUMP HARNESS | - | - |
| ● | Non-reusable part | - | - |
Do not try to remove the black nylon tube as it is welded to the fuel suction with pump and gauge tube assembly.
Click hereEngine / Hybrid System>V35A-FTS (FUEL)>FUEL SYSTEM>PRECAUTION
83320 1.REMOVE FUEL SENDER GAUGE ASSEMBLY
77024A 2.REMOVE FUEL SUCTION PLATE SUB-ASSEMBLY
77131C 3.REMOVE NO. 1 FUEL SUB-TANK
| *a | Protective Tape | - | - |
Detach the claw and disconnect the jet pump.
Using a screwdriver with its tip wrapped in protective tape, disconnect the jet pump from the No. 1 fuel sub-tank.
Do not damage the jet pump and No. 1 fuel sub-tank.
Detach the 3 claws and remove the No. 1 fuel sub-tank.
77174 4.REMOVE NO. 1 FUEL SUCTION SUPPORT
23220A 5.REMOVE FUEL WITH FILTER PUMP ASSEMBLY