Home › Drivetrain › AXLE AND DIFFERENTIAL › REAR DIFFERENTIAL CARRIER ASSEMBLY (for LSD)
RM38G0E _52 Drivetrain _100455 AXLE AND DIFFERENTIAL _0473041 REAR DIFFERENTIAL CARRIER ASSEMBLY(for LSD) A

AXLE AND DIFFERENTIAL  REAR DIFFERENTIAL CARRIER ASSEMBLY(for LSD)  DISASSEMBLY  


CAUTION / NOTICE / HINT

COMPONENTS (DISASSEMBLY)
C459333N01
0.885,1.313 1.302,1.313 true 3.781,0.552 3.781,0.177 3.781,0.177 3.896,0.177 true 2.479,0.833 2.479,0.344 2.479,0.344 2.594,0.344 true 3.281,4.365 3.51,3.969 3.51,3.969 3.625,3.969 true 2.948,1.385 2.865,1.385 2.865,1.385 2.865,1.01 true 3.792,1.125 3.708,1.125 3.708,1.125 3.385,0.896 true 2.188,1.74 1.99,1.74 1.99,1.74 1.99,1.323 true 4.469,0.969 4.385,0.969 4.385,0.969 4.385,0.594 true 6.448,0.24 6.865,0.24 true 3.781,3.167 4.625,3.167 true 3.573,3.615 3.99,3.615 true 5.823,4.385 5.865,4.073 5.865,4.073 5.979,4.073 true 6.281,5.25 6.375,5.25 6.375,5.25 6.375,4.833 true 2.969,5.313 2.844,5.313 2.844,5.313 2.844,4.865 true 4.51,5.135 4.385,5.135 4.385,5.135 4.125,4.521 true 2.219,5.635 2.094,5.635 2.094,5.635 2.094,5.188 true 2.323,4.583 2.552,4.188 2.552,4.188 2.667,4.188 true 5.385,3.76 5.552,3.573 5.552,3.573 5.667,3.573 true 0.417,1.198 0.604,1.427 0.188,0.229 10 false ● 5.781,0.063 6.448,0.396 0.667,0.333 18 false 2 - 5 2.552,1.635 2.844,1.99 0.292,0.354 18 false 7 3.167,0.177 3.458,0.531 0.292,0.354 18 false 8 2.99,1.229 3.281,1.583 0.292,0.354 18 false 9 5.042,3.031 5.49,3.333 0.448,0.302 18 false 10 5.896,5.125 6.333,5.438 0.438,0.313 18 false 10 6.042,3.438 6.542,3.76 0.5,0.323 18 false 11 4.906,5.01 5.406,5.333 0.5,0.323 18 false 12 4.521,0.813 4.969,1.115 0.448,0.302 18 false 13 4.177,3.813 4.625,4.115 0.448,0.302 18 false 14 3.854,0.958 4.302,1.26 0.448,0.302 18 false 15 4.25,0.052 4.698,0.354 0.448,0.302 18 false 16 3.417,5.188 3.865,5.49 0.448,0.302 18 false 17 2.271,5.448 2.563,5.802 0.292,0.354 18 false 1 0.573,1.135 0.865,1.49 0.292,0.354 18 false 6 2.729,4.083 3.042,4.281 0.313,0.198 10 false *1 3.281,3.521 3.594,3.719 0.313,0.198 10 false *2 6.021,3.969 6.333,4.167 0.313,0.198 10 false *2 4.26,2.833 4.708,3.052 0.448,0.219 10 false x 2 6.813,4.302 7.156,4.531 0.344,0.229 10 false x 2 3,0.219 3.188,0.448 0.188,0.229 10 false ● 4.01,3.854 4.198,4.063 0.188,0.208 10 false ●

Procedure Part Name Code
Z101186

Z101188

Z101187

1 SECURE REAR DIFFERENTIAL CARRIER ASSEMBLY 41110 - - -
2 INSPECT REAR DRIVE PINION COMPANION FLANGE SUB-ASSEMBLY 41204 (Click here) - -
3 INSPECT RUNOUT OF DIFFERENTIAL RING GEAR - (Click here) - -
4 INSPECT DIFFERENTIAL RING GEAR BACKLASH - (Click here) - -
5 INSPECT TOTAL PRELOAD - (Click here) - -
6 REMOVE REAR DRIVE PINION DRIVE PINION COMPANION FLANGE NUT 41204B (Click here) - -
7 REMOVE REAR DRIVE PINION COMPANION FLANGE SUB-ASSEMBLY WITH DUST DEFLECTOR 41204 (Click here) - -
8 REMOVE REAR DIFFERENTIAL CARRIER OIL SEAL 41201C (Click here) - -
9 REMOVE REAR DIFFERENTIAL DRIVE PINION OIL SLINGER 41214 - - -
10 REMOVE DIFFERENTIAL BEARING CAP - (Click here) - -
11 REMOVE DIFFERENTIAL CASE ASSEMBLY - (Click here) - -
12 REMOVE DIFFERENTIAL DRIVE PINION - (Click here) - -
13 REMOVE REAR DIFFERENTIAL DRIVE PINION BEARING SPACER 41231 - - -
14 REMOVE REAR DRIVE PINION REAR BEARING (INNER) 41201A (Click here) - -
15 REMOVE REAR DRIVE PINION FRONT BEARING (INNER) 41201B - - -
16 REMOVE REAR DRIVE PINION FRONT BEARING (OUTER) 41201B (Click here) - -
17 REMOVE REAR DRIVE PINION REAR BEARING (OUTER) 41201A (Click here) - -

*1 ADJUST SHIM *2 PLATE WASHER
● Non-reusable part - -

C459334N01
2.833,2.5 2.833,1.5 2.833,1.5 3,1.5 true 1.083,3.25 1.083,0.5 1.083,0.5 2.333,0.5 true 1.833,0.5 1.833,3.083 true 4.583,3.5 4.75,3.5 4.75,3.5 4.75,3 true 5.583,4.167 6.083,4.167 6.083,4.167 6.083,2.417 true 5.417,2.5 5.417,3.25 5.417,3.25 6.083,3.25 true 2.594,3.542 3.073,3.74 0.479,0.198 10 false x 12 4.167,3.344 4.594,3.667 0.427,0.323 18 false 18 3.365,1.344 3.792,1.667 0.427,0.323 18 false 20 2.771,0.333 3.24,0.656 0.469,0.323 18 false 19 4.99,3.99 5.458,4.313 0.469,0.323 18 false 19

Procedure Part Name Code
Z101186

Z101188

Z101187

18 REMOVE DIFFERENTIAL RING GEAR - (Click here) - -
19 REMOVE REAR DIFFERENTIAL CASE BEARING 41301A (Click here) - -
20 INSPECT DIFFERENTIAL CASE - (Click here) - -

*1 ADJUST SHIM *2 PLATE WASHER
● Non-reusable part - -

PROCEDURE

Hide 41110 1.SECURE REAR DIFFERENTIAL CARRIER ASSEMBLY

a.
C458054


Hide 41204 2.INSPECT REAR DRIVE PINION COMPANION FLANGE SUB-ASSEMBLY

a.
C458055C01
4.344,1.604 4.51,1.76 0.167,0.156 10 true *a
*a 36 mm (1.42 in.) - -


i.

Using a dial indicator, measure the runout of the rear drive pinion companion flange sub-assembly vertically and laterally.

Maximum Runout:
Runout Maximum
Vertical runout 0.10 mm (0.00394 in.)
Lateral runout 0.10 mm (0.00394 in.)


If the runout is more than the maximum, replace the rear drive pinion companion flange sub-assembly.



Hide 3.INSPECT RUNOUT OF DIFFERENTIAL RING GEAR

a.
C458056C01
4.542,1.406 4.854,1.563 0.313,0.156 10 false *a
*a 108 mm (4.25 in.) - -


i.

Using a dial indicator, measure the runout of the differential ring gear.

Maximum runout:

0.05 mm (0.00197 in.)


If the runout is more than the maximum, replace the differential ring gear with a new one.



Hide 4.INSPECT DIFFERENTIAL RING GEAR BACKLASH

a.
C459335N01
0.448,0.063 0.729,0.417 0.281,0.354 18 false i

i.

Using a dial indicator, measure the backlash of the differential ring gear.

Standard backlash:

0.10 to 0.20 mm (0.00394 to 0.00787 in.)


If the backlash is not within the specification, adjust the side bearing preload or perform repairs as necessary.

HINT:

Perform the measurement at 3 or more positions around the circumference of the differential ring gear.




Hide 5.INSPECT TOTAL PRELOAD

a.
C458107N03
0.115,0.063 0.458,0.375 0.344,0.313 18 false i

i.

Using a torque wrench, measure the preload with the teeth of the differential drive pinion and differential ring gear in contact.

If the result is not as specified, adjust the preload.

Standard Total Preload:
Bearing Preload
New bearing 1.24 to 2.83 N*m (13 to 28 kgf*cm, 11 to 25 in.*lbf)
Reused bearing 1.24 to 2.60 N*m (13 to 26 kgf*cm, 11 to 23 in.*lbf)




Hide 41204B 6.REMOVE REAR DRIVE PINION NUT

a.
C458059C01
1.448,0.385 1.531,0.135 1.531,0.135 1.698,0.135 true 5.917,1.167 6.5,1.167 true 6.583,1.073 7.042,1.271 0.458,0.198 10 false SST 1.75,0.052 2.208,0.25 0.458,0.198 10 false SST 4.104,0.073 4.438,0.406 0.333,0.333 18 false ii 0.427,0.073 0.667,0.417 0.24,0.344 18 false i 4.417,1.24 4.729,1.396 0.313,0.156 10 false *a 5.969,1.542 6.281,1.698 0.313,0.156 10 false *b
*a Turn *b Hold


i.

Using a chisel and hammer, stake the rear drive pinion companion flange nut.

SST
09930-00010  (09931-00010, 09931-00020)


ii.

Using SST to hold the companion flange in place, remove the rear drive pinion companion flange nut.

SST
09330-00021  (09330-00030)



Hide 41204 7.REMOVE REAR DRIVE PINION COMPANION FLANGE SUB-ASSEMBLY WITH DUST DEFLECTOR

a.
C458060C01
3.667,0.583 3.833,0.583 3.833,0.583 3.958,0.979 true 5.531,0.458 5.844,0.615 0.313,0.156 10 false *a 2.844,0.917 3.063,1.104 0.219,0.188 10 false *b 3.375,0.51 3.677,0.76 0.302,0.25 10 false SST 0.438,0.073 0.823,0.406 0.385,0.333 18 false i
*a Turn *b Hold


i.

Using SST, remove the rear drive pinion companion flange sub-assembly with dust deflector.

SST
09950-40011  (09951-04010, 09953-04020, 09954-04010, 09955-04061)

NOTICE:

Before using SST (center bolt), apply hypoid gear oil to its threads and tip.




Hide 41201C 8.REMOVE REAR DIFFERENTIAL CARRIER OIL SEAL

a.
C458061C01
3.083,2.083 3.25,2.083 3.25,2.083 3.313,1.792 false 5,0.833 4.833,0.833 4.833,0.833 4.76,0.719 true 5.125,1.385 4.969,1.385 4.969,1.385 4.646,0.688 true 2.771,2 3.229,2.198 0.458,0.198 10 false SST 5.042,0.76 5.229,0.938 0.188,0.177 10 false *1 5.188,1.313 5.417,1.531 0.229,0.219 10 false *2 0.385,0.063 0.708,0.375 0.323,0.313 18 false i
*1 Rear Differential Carrier Oil Seal *2 Rear Differential Drive Pinion Oil Slinger


i.

Using SST, remove the rear differential carrier oil seal.

SST
09308-10010  



Hide 41214 9.REMOVE REAR DIFFERENTIAL DRIVE PINION OIL SLINGER

a.
C458062


Hide 10.REMOVE DIFFERENTIAL BEARING CAP

a.
C459336C01
2.417,1.167 2.417,0.833 2.417,0.833 3.031,0.833 true 2.167,1.167 3.469,1.167 true 2,1.063 2.25,1.313 0.25,0.25 10 false *a 1,2.083 1.25,2.333 0.25,0.25 10 false *b 4.583,2.083 4.813,2.333 0.229,0.25 10 false *c 0.396,2 0.75,2.302 0.354,0.302 18 false iii 1.583,0.083 2.031,0.448 0.448,0.365 18 false i, ii
*a Matchmark *b LH Side (Back Side)
*c RH Side (Teeth Side) - -


i.

Place matchmarks on the differential bearing cap and differential carrier.


ii.

Remove the 4 bolts and 2 differential bearing caps.


iii.

Remove the 2 plate washers.

HINT:
·

Put identification marks on the plate washers to show the location for installation (LH side (back side) or RH side (teeth side)), or keep them separate so that they can be distinguished.

·

Measure the thickness of each plate washers and note it.





Hide 11.REMOVE DIFFERENTIAL CASE ASSEMBLY

a.
C459337N01
0.469,0.115 0.75,0.469 0.281,0.354 18 false i

i.

Remove the electronic differential lock case sub-assembly from the differential carrier.

HINT:

Tag the 2 rear differential case bearings (outer) so that they can be reinstalled in the correct locations.




Hide 12.REMOVE DIFFERENTIAL DRIVE PINION

a.
C458067N01
0.406,0.063 0.615,0.333 0.208,0.271 18 false i

i.

Using a press, remove the differential drive pinion with rear differential drive pinion bearing spacer from the differential carrier.

NOTICE:

Do not drop the differential drive pinion.




Hide 41231 13.REMOVE REAR DIFFERENTIAL DRIVE PINION BEARING SPACER

a.
C458068


Hide 41201A 14.REMOVE REAR DRIVE PINION REAR BEARING (INNER)

a.
C458069N01
4.813,1.719 5.083,1.333 5.083,1.333 5.25,1.333 true 5.323,1.25 5.75,1.5 0.427,0.25 10 false SST 0.448,0.063 0.729,0.417 0.281,0.354 18 false i

i.

Using SST and a press, press out the rear drive pinion rear tapered roller bearing (inner) from the differential drive pinion.

SST
09555-55010  

NOTICE:

Do not drop the differential drive pinion.


HINT:

If the differential drive pinion or differential ring gear is damaged, replace them as a set.




Hide 41201B 15.REMOVE REAR DRIVE PINION FRONT BEARING (INNER)

a.
C458070


Hide 41201B 16.REMOVE REAR DRIVE PINION FRONT BEARING (OUTER)

a.
C458071C01
4.531,0.698 5.083,0.698 true 5.156,0.615 5.344,0.802 0.188,0.188 10 true *1 0.448,0.052 0.729,0.406 0.281,0.354 18 false i
*1 Rear Drive Pinion Front Tapered Roller Bearing (Outer) - -


i.

Using SST, remove the rear drive pinion front tapered roller bearing (outer) from the differential carrier.

SST
09308-00010  



Hide 41201A 17.REMOVE REAR DRIVE PINION REAR BEARING (OUTER)

a.
C458073N01
0.406,0.094 0.688,0.448 0.281,0.354 18 false i

i.

Using a brass bar and hammer, tap out the rear drive pinion rear bearing (outer) and adjusting shim from the differential carrier.

HINT:

If the bearing is damaged during removal, replace it.




Hide 18.REMOVE DIFFERENTIAL RING GEAR

a.
C459338C01
2.375,0.906 2.875,0.906 true 2.354,0.823 2.656,0.823 2.656,0.823 2.656,0.906 true 2.927,0.802 3.156,1.031 0.229,0.229 10 false *a 3.906,0.073 4.323,0.406 0.417,0.333 18 false iii 0.167,0.083 0.75,0.417 0.583,0.333 18 false i, ii
*a Matchmark - -


i.

Place matchmarks on the differential ring gear and differential case.


ii.

Remove the 12 differential ring gear set bolts.


iii.

Using a plastic-faced hammer, tap on the differential ring gear to remove it from the differential case.

NOTICE:

Do not damage the position plate when removing the ring gear.




Hide 41301A 19.REMOVE REAR DIFFERENTIAL CASE BEARING (INNER)

a.
C459340C01
4.458,0.875 4.875,0.875 true 0.76,1.385 0.927,1.385 0.927,1.385 1.5,1.115 true 0.927,0.844 1.333,0.844 true 4.302,1.438 4.469,1.438 4.469,1.438 5.042,1.167 true 4.156,0.802 4.531,1 0.375,0.198 10 false SST 0.625,0.781 1,0.979 0.375,0.198 10 false SST 0.802,0.031 1.115,0.188 0.313,0.156 10 false *a 4.417,0.063 4.729,0.219 0.313,0.156 10 false *b 2.521,0.052 2.833,0.208 0.313,0.156 10 false *c 4.24,0.438 4.51,0.625 0.271,0.188 10 false *d 4.125,0.094 4.385,0.417 0.26,0.323 18 false ii 0.552,0.094 0.813,0.417 0.26,0.323 18 false i 0.646,0.417 0.917,0.604 0.271,0.188 10 false *d 6.073,0.063 6.385,0.219 0.313,0.156 10 false *c 0.406,1.281 0.781,1.479 0.375,0.198 10 false SST 3.948,1.344 4.323,1.542 0.375,0.198 10 false SST
*a for LH Side *b for RH Side
*c Turn *d Hold


i.

Using SST, remove the rear differential case bearing (inner) from the differential case sub-assembly.

SST
09950-40011  (09951-04020, 09952-04010, 09953-04030, 09954-04010, 09955-04061, 09957-04010, 09958-04011)
09950-60011  (09951-00480)

HINT:

Attach the claws of SST to the notch in the differential case assembly to secure SST.



ii.

Using SST, remove the rear differential case bearing (inner) from the differential case sub-assembly.

SST
09950-40011  (09951-04020, 09952-04010, 09953-04030, 09954-04010, 09955-04011, 09957-04010, 09958-04011)
09950-60011  (09951-00480)

HINT:
·

Attach the claws of SST to the notch in the differential case assembly to secure SST.

·
C463198

If the rear differential case bearing (inner) is removed sufficiently and the part remains on the case side, use SST as shown in the illustration and remove the relevant part.





Hide 20.INSPECT DIFFERENTIAL CASE

a.

Check that the differential case is not damaged.

If the differential case is damaged, replace it.