| *A | w/ Child Restraint System Guide | *B | w/o Wire Harness |
|
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) |
|
N*m (kgf*cm, ft.*lbf) : Specified torque |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 24 | REAR NO. 1 SEAT ASSEMBLY RH | - | - | - | - |
Wear protective gloves. Sharp areas on the parts may injure your hands.
There is risk of injury.
73310D 1.INSTALL REAR CENTER SEAT 3 POINT TYPE BELT ASSEMBLY
|
Install in this Direction (1) |
|
Nut A |
|
Nut B | - | - |
Install the rear seat center 3 point type belt assembly with the nut A and B.
Pass the belt through the No. 1 seatback frame sub-assembly RH as shown in the illustration.
2.INSTALL SEPARATE TYPE REAR SEATBACK ASSEMBLY RH
71930Q 3.INSTALL REAR SEAT HEADREST SUPPORT ASSEMBLY
73373 4.INSTALL REAR SEAT SHOULDER BELT COVER
73178A 5.INSTALL SEAT BELT ANCHOR COVER CAP
71701A 6.INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY RH
72996J 7.INSTALL REAR NO. 2 SEATBACK COVER (w/ Child Restraint System Guide)
72996H 8.INSTALL REAR SEATBACK COVER (w/ Child Restraint System Guide)
73310D 9.CONNECT REAR CENTER SEAT 3 POINT TYPE BELT ASSEMBLY (SEAT ANCHOR)
72995F 12.INSTALL REAR SEAT CUSHION COVER RH
71301G 13.INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH
71302C 14.INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH
82193 15.INSTALL REAR SEAT WIRE RH (w/o Wire Harness)
79967W 16.INSTALL REAR NO. 1 SEAT NO. 4 LEG SIDE COVER
79951B 17.INSTALL NO. 1 SEAT NO. 1 CUSHION COVER
79952A 18.INSTALL NO. 1 SEAT NO. 2 CUSHION COVER
78950F 19.INSTALL NO. 1 FOLD SEAT STOPPER BAND ASSEMBLY
71833S 20.INSTALL REAR NO. 1 SEAT RECLINING COVER RH
72329F 22.INSTALL REAR SEAT ADJUSTER BOLT COVER
71834S 23.INSTALL REAR NO. 1 SEAT RECLINING COVER LH
24.INSTALL REAR NO. 1 SEAT ASSEMBLY RH